Pass Your Cisco Exam with 300-815 Exam Dumps (Updated 120 Questions)
300-815 Exam Dumps - Cisco Practice Test Questions
Difficulty in Writing Cisco 300-815: Implementing Cisco Advanced Call Control and Mobility Services Exam
The certification for (300-815) is one of the most essential certification for candidates on their resume. One of the greatest obstacles for many candidates is to utilize the internet to obtain so many facts that they cannot imagine that would benefit them by choosing the right material for their examinations. Testing troubleshooting and maintaining the Cisco mobility services (300-815) is not easier and might prove to be a very demanding examination unless properly prepared. The difficulty of the test may be solved if skilled 300-815 exam dumps are investigating and evaluating on 300-815 practice exams. The candidates may nonetheless pass the test with the necessary attention and the right preparing material. Certification questions are the most up-to-date 300-815 pdf dumps which offer a well understood pattern for issues faced with actual certification by these dumping seekers. The specialists monitor certification questions for all course modifications. Certification difficulties also demand actual study, a great venue for testing knowledge. Refer to the links below for the substance of the study.
Official Courses for Cisco 300-815 Exam Preparation
Before taking the exam, you have to master all the above topics. The most rational way to do this is by adopting corresponding Cisco training. These are three programs you can apply for:
- Understanding Cisco Collaboration Foundations (CLFNDU)
This is one more training course that would make you ready for this test. It provides you with all the information you need to know to maintain a simple Cisco Unified Communications Manager and handle the Session Initiation Protocol (SIP) gateway. It encompasses preliminary settings, the management of systems, customer management, media services management, as well as tools used for troubleshooting and maintenance of CU Communications solutions. This program also has a duration of 5 days regardless of its format, which includes the options such as instructor-led, virtual classroom, and E-learning.
- Implementing and Understanding Cisco Advanced Call Control and Mobility Services (CLACCM)
During this official course, you will get solid knowledge about how to utilize CU-CM features to simplify the communications system into a modular, lightweight, and reliable collaboration approach. You will also learn about several other features, such as Globalized Call Routing, Cisco Extension Mobility, Cisco Unified Mobility, and many others. Using this course as your guide will bolster your studies for the test. The training is offered in three forms: 5 days of instructor-led classes, 5 days of virtual sessions, or a set of E-learning tools and materials equivalent to 5-day preparation.
- Implementing and Operating Cisco Collaboration Core Technologies (CLCOR)
If you start from the very beginning, it’s better to first enroll in training for the core test. It lets you prepare for the Cisco CCNP Collaboration from scratch, covering the most basic concepts. During it, you'll prepare for advanced-level positions based on Cisco collaboration technologies deployment and service. You will also acquire the expertise and skills one needs to have to install and deploy common collaboration and networking technologies. Also, it is focused on the areas like configuration, call management, service quality, and other Cisco collaboration applications. It can be followed as 8-day sessions guided by an instructor, 8-day virtual training, or E-learning.
Cisco 300-815: Implementing Cisco Advanced Call Control and Mobility Services Exam Certification Path
The Exam is associated with the CCNP Service Provider and the Certifications of Cisco Accredited Professional-Service Provider VPN Services Implementation. This is the official condition for this examination. The course, Integrating Cisco Service Provider VPN Services, however, helps candidates to prepare for the test and is highly recommended.
NEW QUESTION 17
In Cisco Unified Communications Manager globalized call routing is implemented and must confirm that it is correctly implemented without making a call. Which tool do you use for verification?
- A. SDL trace
- B. Real-Time Monitoring Tool
- C. SDI trace
- D. Dialed Number Analyzer
Answer: D
NEW QUESTION 18
You see the voice register pool 1 command in your Cisco Unified Communications Manager Express configuration. Which configuration is occurring in this section?
- A. configuration items common for all SIP phones
- B. configuration for SIP registrar service
- C. configuration for a pool of SIP phones (similar to device pool on Cisco Unified Communications Manager)
- D. configuration for a single SIP phone
Answer: D
NEW QUESTION 19
Refer to the exhibit.
An engineer configures Cisco Unified Border Element to connect the enterprise VoIP network with a SIP telephony provider. Calls are not working in either direction. What must be configured in the dial peer 1 to fix the issue?
- A. session-protocol sipv2
- B. codec g729
- C. incoming called number 555.......
- D. answer-address 555 ........
Answer: A
NEW QUESTION 20
Why would RTP traffic that is sent from the originating endpoint fail to be received on the far endpoint?
- A. The far end connection data (c=) in the SDP was overwritten by deep packet inspection in the call signaling path.
- B. The RTP traffic is arriving beyond the jitter buffer on the receiving end.
- C. A firewall in the media path is blocking TCP ports 16384-32768.
- D. Cisco Unified Communications Manager invoked media termination point resources.
Answer: C
NEW QUESTION 21
Why would RTP traffic that is sent from the originating endpoint fail to be received on the far endpoint?
- A. The far end connection data (c=) in the SDP was overwritten by deep packet inspection in the call signaling path.
- B. The RTP traffic is arriving beyond the jitter buffer on the receiving end.
- C. A firewall in the media path is blocking TCP ports 16384-32768.
- D. Cisco Unified Communications Manager invoked media termination point resources.
Answer: B
NEW QUESTION 22
Refer to the exhibit.
An engineer is troubleshooting an issue where inbound calls to Cisco UCM with early media fail to establish. While investigating the issue, the engineer finds that Cisco UCM is set to require a PRACK. but the Cisco Unified Border Element is not sending it. Which command is causing this issue?
- A. voice-class midcall-signaling block
- B. voice-class sip rel1xx disable
- C. voice-class sip conn-reuse
- D. voice-class sip early-media update block
Answer: B
NEW QUESTION 23
A single site reports that when they dial select numbers, the call connects, but they do not get audio. The administrator finds that the calls are not routing out of the normal gateway but out of another site's gateway due to a TEHO configuration. What is the next step to diagnose and solve the issue?
- A. Verify that the dial peer of the gateway has the correct destination pattern configured.
- B. Verify that the route pattern is not blocking calls to the destination number.
- C. Verify that IP routing is correct between the gateway and the IP phone.
- D. Verify that the route pattern has the correct calling-party transformation mask
Answer: A
NEW QUESTION 24
After configuring a Cisco CallManager Express with Cisco Unity Express, inbound calls from the PSTN SIP trunk receive a ring tone for 20 seconds and then a busy signal instead of voicemail. Which configuration fixes this problem?
- A. Router(config)#dial-peer voice 2 voip
Router(config-dial-peer)#no vad - B. Router(config)# voice service voip
Router(conf-voi-serv)#no supplementary-service sip moved-temporarily - C. Router(config)# voice service voip
Router(conf-voi-serv)#allow-connections h323 to h323 - D. Router(config)# voice service voip
Router(conf-voi-serv)#allow-connections voice-mail mod
Answer: B
NEW QUESTION 25
A customer routes PSTN calls to ITSP through a SIP trunk on Cisco UCM that forwards and receives calls to and from ITSP. ITSP is set to send an E.164 number when the customer's extension is four digits. Which action should be taken to route the incoming calls to four-digit extensions?
- A. Configure a voice translation rule to map the E.164 number to four digits and assign it to the incoming dial-peer on Cisco Unified Border Element.
- B. Configure a voice translation profile to map the E.164 number to four digits and assign it to the incoming dial-peer on Cisco Unified Border Element.
- C. Set the Significant Digits to 8 on the SIP trunk.
- D. Set the Significant Digits to 4 on the SIP trunk.
Answer: D
NEW QUESTION 26
An administrator is configuring a cluster for ILS and wants to limit the amount of entities that Cisco Unified Communications Manager can write to the database for data that is learned through ILS. Which service parameter is used to adjust this limit?
- A. Imported Dial Plan Replication Database Object Lower Limit
- B. Global Data Service Parameter Limit
- C. ILS Max Number of Learned Objects in Database
- D. ILS Active Learned Object Upper Limit
Answer: C
Explanation:
Section: Cisco Unified CM Call Control Features
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/12_5_1SU1/systemConfig/ cucm_b_system-configuration-guide-1251su1/cucm_b_system-configuration-guide-
1251su1_restructured_chapter_0100011.html#CUCM_TK_I7C708C2_00
NEW QUESTION 27
Which call pickup feature allows users to pick up incoming calls in a group that is associated with their own group?
- A. Group Call Pickup
- B. BLF Call Pickup
- C. Other Group Pickup
- D. Directed Call Pickup
Answer: C
Explanation:
Reference:
https://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/4_1_3/ccmsys/ a07cpick.html#wp1022865
NEW QUESTION 28
Which two types of authentication are supported for the configuration of Intercluster Lookup Service? (Choose two.)
- A. TLS certificates
- B. username and secret key
- C. passwords
- D. TokenID
- E. FQDN of the servers defined in DNS
Answer: A,C
NEW QUESTION 29
Which configuration must an administrator perform to display Translation Pattern operations in Cisco Unified Communications Manager SDL traces?
- A. By default, the Translation Patterns operations are printed in SDL traces, so no additional configuration is necessary.
- B. Enable the Detailed Call Analysis option under Enterprise Parameters for Unified CM.
- C. Check the Translation Patterns Analysis check box in Micro Traces on the Cisco Unified CM Serviceability page.
- D. Set up the Digit Analysis Complexity in Service Parameters for Cisco Unified CM to TranslationAndAlternatePatternAnalysis.
Answer: A
NEW QUESTION 30
Refer to the exhibit.
DN 1003 was the last to ring during the most recent call. Which hunting method ensures that DN 1005 is presented with the next call when the hunt pilot is dialed?
- A. peer
- B. call-blast
- C. sequential
- D. parallel
Answer: A
NEW QUESTION 31
Due to a shortage of physical interfaces on a device the administrator requires that a loopback for RTP is used.
Which command is required when using a loopback interface for RTP?
- A. voice-class sip bind control source-interface Loopback0
- B. voice-class sip resources priority mode passthrough
- C. voice-class sip early-offer forced.
- D. voice-class sip bind media source-interface Loopback0
Answer: D
NEW QUESTION 32
A user reports when they press the services key they do not receive a user ID and password prompt to assign the phone extension. Which action resolves the issue?
- A. Create the default device profiles for all phone models that are used.
- B. Subscribe the phone to the Cisco Extension Mobility service.
- C. Create the end user and associate it to the device profile.
- D. Assign the extension as a mobile extension.
Answer: B
NEW QUESTION 33
......
New Real 300-815 Exam Dumps Questions: https://drive.google.com/open?id=1DiK5JQaq7DfVeuMEwFXQy7lpvaTU7XLt
Pass Your 300-815 Exam Easily with Accurate PDF Questions: https://www.prep4surereview.com/300-815-latest-braindumps.html
