Use the best ways of preparing for 1Z0-1079-20 Exam Dumps with Prep4SureReview Oracle 1Z0-1079-20 dump PDF [2021]
Oracle 1Z0-1079-20 exam candidates will surely pass the Exam if they consider the 1Z0-1079-20 dumps learning material presented by Prep4SureReview.
NEW QUESTION 25
Which three statements are true when setting up Match Rules for Freight Payment in OTM? (Choose three.)
- A. BM or Bill Of Lading is a mandatory shipment reference number qualifier to match to.
- B. The match rule will apply to all invoices, unless only certain service providers are specified on the match rule.
- C. You need to specify at least one shipment reference number qualifier to match to.
- D. You could specify several shipment reference values to match to.
- E. The matching rule could be different for different service providers.
Answer: A,C,E
NEW QUESTION 26
Shipment# 10059 is a Multi-Stop shipment with two orders. Both orders are picked up in New York City. One of the orders is dropped off in Philadelphia, Pennsylvania, and the other order dropped off in Baltimore, Maryland. There is empty capacity on this shipment for you to add another order (# 1234), which is picking up in Philadelphia and dropping off in Baltimore. The status of Shipment# 10059 is "SECURE RESOURCES:
NOT_STARTED"
Which shipment planning option should you use to ensure that order release# 1234 is assigned to Shipment#
10059?
- A. Manual
- B. Bulk Plan
- C. Show Routing Options
- D. Move Order to Existing Shipment
Answer: C
NEW QUESTION 27
Which three options are available after a document has been assigned to a Customs transaction as a standard document? (Choose three.)
- A. Edit the document.
- B. Validate the document content.
- C. Generate the document content.
- D. Upload the document content.
- E. View the document content.
Answer: B,C,E
NEW QUESTION 28
At which three levels does Match Rules allow the Invoice Matching to occur? (Choose three.)
- A. Shipment location level
- B. Order line level
- C. Shipment Ship Unit level
- D. Shipment level
- E. Shipment Ship Unit line level
Answer: A,B,D
NEW QUESTION 29
Which one of the following is the correct procedure for setting up and assigning a Screen Set ID to a User?
- A. Always unassign existing menu and create a screen Set ID, assign it to User.
- B. Create a Screen Set ID and assign it to User.
- C. Create a Screen set ID, assign it to Menu Manager and assign it to User.
- D. Create a Screen Set ID and assign it to Domain.
Answer: C
NEW QUESTION 30
Select the two true statements about OTM Agents. (Choose two.)
- A. Agents "listen" for a condition to occur.
- B. Agents can be configured to run multiple times on a time-based schedule.
- C. Agents can send alerts when a condition has occurred, and they can also create or change data objects.
- D. Agents can send alerts when a condition has occurred, but they cannot create or change data objects.
Answer: B,D
NEW QUESTION 31
You have created the following Workflow Agent in your OTM test environment and you want to move it to your OTM production environment:
Agent Name: SHIPMENT NOTIFY
Event: LATE_SHIPMENT (New Custom Event)
Saved Condition: SHIPMENT IS INBOUND (New saved condition)
Actions:
IF SHIPMENT STATUS IS NOT CANCELLED (IF uses a new Saved Condition)
SET INTERNAL STATUS: ENROUTE_DELAYED ENDIF
Which Screen Set ID's do you have to use in your Migration Project?
- A. AGENT, CUSTOM_EVENT, SAVED_CONDITION, SAVED QUERY
- B. AGENT, AGENT_EVENT, SAVED_CONDITION_QUERY
- C. AGENT, AGENT_EVENT, SAVED_CONDITION, SAVED QUERY
- D. AGENT, CUSTOM_EVENT, SAVED_CONDITION
- E. AGENT, EVENT, SAVED_CONDITION, SAVED QUERY
Answer: D
NEW QUESTION 32
Which statement is correct regarding the OTM Parameter Set?
- A. There are less than 30 parameters that can be changed in the Default Parameter Set.
- B. OTM allows only one Parameter Set, and it is stored in the PUBLIC domain.
- C. If you want to create a Parameter Set, you must name it "DEFAULT".
- D. Parameter Sets are mandatory during Bulk planning.
- E. OTM allows more than one Parameter Set, but they must be stored in the PUBLIC domain.
Answer: C
NEW QUESTION 33
Identify the object in which Saved query cannot be used.
- A. Business Monitors
- B. Reports
- C. Automation Agents
- D. Finders (Search pages)
Answer: C
NEW QUESTION 34
Select the three business objects that can be managed using the Fleet Management module. (Choose three.)
- A. Driver payroll
- B. Fleet equipment
- C. Driver work hours
- D. Fleet power units
- E. Driver time off, sick time, vacations, etc.
Answer: A,B,E
NEW QUESTION 35
Which output option from the below is available for exporting data using the CSV Export function?
- A. a file on your database server
- B. text editor programs such as Notepad
- C. MS Excel
- D. browser window
Answer: A
NEW QUESTION 36
How would you create an association in OTM if you want to associate a Match Rule to a specific Service Provider (carrier)?
- A. Create the Rule, then assign the Service Provider to the Rule.
- B. Create the Rule, assign the Rule to an appropriate Rule Profile, then assign the Service Provider to the Rule Profile.
- C. Create the Rule, then assign the Rule to the Service Provider.
- D. Create the Rule, assign the Rule to an appropriate Rule Profile, then assign the Rule Profile to the Service Provider.
Answer: C
NEW QUESTION 37
By default, OTM installs some agents at the time of installation.
Identify two correct statements. (Choose two.)
- A. All agents are inactive. The Administrator or other authorized persons must review and activate those they want to run in their environment.
- B. OTM will install agents into the designated "company" domain, but not into domains such as PUBLIC and SERVPROV.
- C. All agents are active. The Administrator or other authorized persons must review and deactivate those they want to run in their environment.
- D. By default, some agents are active, while others are inactive. The Administrator or other authorized persons must review the agents and activate or deactivate appropriately.
- E. OTM will install agents into domains such as PUBLIC and SERVPROV.
Answer: A,E
NEW QUESTION 38
Select the three correct statements regarding Freight Settlement in OTM. (Choose three.)
- A. Invoices in OTM must be tied to a shipment.
- B. Freight Invoices may be created within OTM or interfaced from an external system.
- C. Rules for matching, approval, and allocation are the cornerstones of automation in Freight Settlement.
- D. Invoice checks may be printed out of OTM.
- E. Freight Settlement in OTM may be used to pay invoices to carriers as well as bill customers for freight.
Answer: B,D,E
NEW QUESTION 39
In the process of "Adjust shipment cost scenario," you select "reversing and adjusting" Shipment cost.
What will be performed by OTM?
- A. The system creates a new cost that negates the original cost. Then it creates another new cost with the new cost value.
- B. The system takes the original cost and adds or subtracts an amount to it to create the new cost.
- C. The system reverses a cost by creating a new cost with a negative amount that matches the amount of the original cost.
- D. The system gives the user an option to update the amount.
Answer: C
NEW QUESTION 40
When creating a new Declaration type in Global Trade Management (GTM), which three processes may need to be configured depending on the requirements of the local customs authority? (Choose three.)
- A. Define a constraint set with grouping criteria that identifies how to combine Trade Transactions into a Declaration.
- B. Set up a License Code that defines whether a license is incremented or decremented for the Trade Transaction.
- C. Set up a data configuration that defines the data required to be copied from the Transaction onto the Declaration.
- D. Create aggregation criteria that consolidate Transaction Lines, based on parameters such as tariff code or country of origin, into fewer lines on the final Declaration.
Answer: B,C,D
NEW QUESTION 41
Which two options must be defined for shipment planning? (Choose two.)
- A. Equipment Class
- B. Equipment Group
- C. Equipment
- D. Equipment Type
- E. Equipment Group Profile
Answer: C,D
NEW QUESTION 42
Which three statements are true about Regions in Global Trade Management (GTM)? (Choose three.)
- A. Regions uploaded by a CSV file need to be formulated.
- B. Regions can be directly used after being created by a user in the UI.
- C. Regions created in the UI need to be formulated.
- D. Regions cannot be directly used after being uploaded by a CSV file.
- E. Regions can be directly used after being uploaded by a CSV file.
Answer: A,C,E
NEW QUESTION 43
What must you do in order to export data from the CONTACT table, so that the data only includes contacts with email addresses ending with "@oracle.com"?
- A. Export the data first, and then use software such as MS Excel, MS Access, or direct SQL to filter the data.
- B. The CSV utility is useful for managing large amounts of data, but it is not capable of filtering data during the export process.
- C. Create a CSVUTIL file that specifies the "@oracle.com" qualifier.
- D. Use the "Where" clause on the CSV Export screen to specify the "@oracle.com" qualifier.
Answer: A
NEW QUESTION 44
After creating a report, which step must occur in order to register the report for execution within Oracle Transportation Management?
- A. Select the Report System and specify the Report Path.
- B. Create a new Data Source pointing to the OTM database.
- C. Create a new Data Source pointing to the BI Publisher database.
- D. Make a directory "BIPCatalogUtil" under [BI Publisher Home]/
Answer: D
NEW QUESTION 45
How should you set up permissions for users to access data in other domains?
- A. Assign User Preference via Manage User access.
- B. Use Domain Grants.
- C. Assign Access Control List in User Role.
- D. Use Insert User Role in VPD Profile.
Answer: B
NEW QUESTION 46
In which two of the following cases is it useful to use the "Show Routing Options" shipment planning method? (Choose two.)
- A. when you want to view OTM's recommendation without actually planning the shipment
- B. when you want to override the delivery constraints on the Order Base
- C. when you want to specify the itinerary that you want to use for the shipment
- D. when you want to auto-tender the shipment after planning is complete
- E. when you want to specify the carrier that you want to receive the shipment tender
Answer: B,D
NEW QUESTION 47
......
Accurate & Verified Answers As Seen in the Real Exam here: https://www.prep4surereview.com/1Z0-1079-20-latest-braindumps.html
