D-NWG-DS-00 Practice Test Questions Updated 123 Questions
EMC D-NWG-DS-00 Dumps - Secret To Pass in First Attempt
NEW QUESTION # 68
Which of the following should be considered during the planning phase of a Cyber Recovery Vault?
Response:
- A. Physical distance between production and recovery sites
- B. VLAN segmentation
- C. Network switch redundancy
- D. The use of thin provisioning
Answer: A
NEW QUESTION # 69
What is the primary purpose of the scoping phase in a networking design project?
Response:
- A. To provide network monitoring solutions
- B. To install network hardware
- C. To define the project scope, deliverables, and requirements
- D. To configure network switches and routers
Answer: C
NEW QUESTION # 70
What is a key reason for using templates during the network design documentation process?
Response:
- A. To reduce the time required for documenting repetitive tasks
- B. To automate network configuration
- C. To replace the need for network monitoring tools
- D. To dynamically assign IP addresses
Answer: A
NEW QUESTION # 71
In which scenario would the FastList tool be most beneficial during the scoping phase of a network design project?
Response:
- A. When you need to calculate the environmental requirements of a network rack
- B. When you need to generate deployment scripts for network devices
- C. When you need to prioritize and organize project requirements for a new data center design
- D. When you need to estimate the cost of network hardware
Answer: C
NEW QUESTION # 72
Which activity is the responsibility of the customer in the network replacement process?
Response:
- A. Create a deployment verification report.
- B. Create a detailed replacement plan.
- C. Create a detailed replacement plan.
- D. Create a validation plan.
Answer: D
NEW QUESTION # 73
What are three of the phases of an Enterprise Project Services project?
Response:
- A. Approval
- B. Scoping
- C. Close
- D. Design
Answer: B,D
NEW QUESTION # 74
Which of the following is an essential part of deployment support to prevent downtime during the go-live phase?
Response:
- A. Conducting a final network assessment
- B. Implementing IP address restrictions
- C. Scheduling system backups
- D. Enabling traffic monitoring tools
Answer: A
NEW QUESTION # 75
Match the following templates with their corresponding functions:
Template Type
Pre-Deployment Configuration
Post-Deployment Verification
VLAN Assignment
Troubleshooting Template
Function
A) Defines the initial network settings before implementation
B) Validates that the network meets design specifications
C) Documents the VLAN structure and IP assignments
D) Records steps and resolutions for network issues
Response:
- A. Pre-Deployment Configuration - B
- B. Pre-Deployment Configuration - A
- C. Pre-Deployment Configuration - A
- D. Pre-Deployment Configuration - A
Answer: C
NEW QUESTION # 76
A network was designed, and the products were shipped to the customer. What must a Design Architect be familiar with to properly document the network design?
Response:
- A. Tools and templates
- B. Access to Customer Support
- C. Financial budgets and constraints
Answer: A
NEW QUESTION # 77
Which network planning task is specifically associated with the VxRail SFS platform?
Response:
- A. Integrating storage networks for virtualization platforms
- B. Designing network segmentation and firewalls
- C. Planning physical cabling for network switches
- D. Deploying cloud-based access points
Answer: A
NEW QUESTION # 78
What is the main focus when planning a network that supports Fibre Channel over Ethernet (FCoE)?
Response:
- A. Configuring access control lists (ACLs)
- B. Implementing VLANs for segmentation
- C. Consolidating SAN and LAN traffic over the same network
- D. Securing network traffic with firewalls
Answer: C
NEW QUESTION # 79
The deployment support phase ensures that all network devices are __________ and operational before the system goes live.
Response:
- A. Documented
- B. Monitored
- C. Verified
- D. Configured
Answer: D
NEW QUESTION # 80
What is the main function of CloudIQ in the planning and management of Dell PowerSwitch devices?
Response:
- A. Manages firewall rules and security policies
- B. Provides cloud-based storage for network configurations
- C. Enables predictive analytics and performance monitoring
- D. Provides licensing for PowerSwitch devices
Answer: C
NEW QUESTION # 81
Match the following planning phases with their descriptions:
Phase
Physical planning
Layer 2 (L2) planning
Layer 3 (L3) planning
OS10 Licensing
Description
A) Identifies hardware locations and cable paths
B) Focuses on VLANs, MAC addresses, and switching
C) Defines routing protocols, IP addressing, and topology
D) Ensures the correct software licensing for OS10 devices
Response:
- A. Physical planning - D
- B. Physical planning - A
- C. Physical planning - A
- D. Physical planning - B
Answer: B
NEW QUESTION # 82
FastScript can be used to automatically generate and apply __________ across multiple devices in a network, ensuring consistency and accuracy.
Response:
- A. Security protocols
- B. IP addresses
- C. Routing policies
- D. Configuration scripts
Answer: D
NEW QUESTION # 83
Why is it important to test scripts generated by FastScript in a lab environment before applying them to live systems?
Response:
- A. To confirm that the scripts are compatible with all connected devices
- B. To identify any errors or conflicts that could affect the live network
- C. To reduce the time spent on deployment
- D. To ensure that the scripts meet enterprise security standards
Answer: B
NEW QUESTION # 84
What is the primary role of a networking design professional in an enterprise environment?
Response:
- A. To monitor daily network traffic
- B. To architect and design a scalable, efficient, and secure network infrastructure
- C. To install network cables
- D. To configure individual network devices
Answer: B
NEW QUESTION # 85
What is the primary purpose of using templates in a network design project?
Response:
- A. To generate real-time network traffic reports
- B. To assign IP addresses dynamically
- C. To automate network configuration
- D. To standardize documentation and ensure consistency
Answer: D
NEW QUESTION # 86
Which task should be completed as part of the EDP pre-deployment checks?
Response:
- A. Ensuring that network documentation is fully aligned with enterprise standards
- B. Updating router firmware
- C. Performing a network speed test
- D. Installing software patches
Answer: A
NEW QUESTION # 87
What is the primary purpose of the FastScript tool in network design?
Response:
- A. To monitor network performance in real-time
- B. To automate the deployment of network devices
- C. To create VLAN assignment tables
- D. To generate configuration scripts for network devices
Answer: D
NEW QUESTION # 88
A Design Architect is coordinating with a sales team to provide an example of the networking capabilities of a PowerEdge MX7000 for a customer. Which networking resource meets this requirement?
Response:
- A. GNS3
- B. VMware Hands-on Labs
- C. Demo Center
- D. Enablement Lab
Answer: C
NEW QUESTION # 89
......
EMC D-NWG-DS-00 Exam Dumps [2025] Practice Valid Exam Dumps Question: https://www.prep4surereview.com/D-NWG-DS-00-latest-braindumps.html
D-NWG-DS-00 Dumps - Grab Out For [NEW-2025] EMC Exam: https://drive.google.com/open?id=1BTV5Q83UgMLrWAocprQvW9zM8Vb6kW3z
