[May-2026] The Best System Administration 4 A10-System-Administration Professional Exam Questions
Try 100% Updated A10-System-Administration Exam Questions [2026]
NEW QUESTION # 10
When private partitions are created on a device where VRRP-A is enabled, which statement is true?
- A. VRID 0 is configured with settings identical to VRID 0 on the shared partition.
- B. VRID 0 is configured with its default settings.
- C. VRRP-A is not available on private partitions.
- D. No VRIDs are configured on a private partition until explicitly configured.
- E. All VRIDs on the shared partition are replicated on the private partitions.
Answer: B
NEW QUESTION # 11
When VRRP-A is enabled on a device with multiple partitions, which statement about VRID 0 is correct?
- A. VRID 0 is initially enabled only in the shared partition; partition administrators can enable VRID 0 in their partitions.
- B. VRID 0 only exists in the shared partition; private partitions can only contain VRIDs numbered higher than 0.
- C. Each partition has its own distinct VRID 0.
- D. When using VRRP-A on a device with multiple partitions, VRID 0 is automatically disabled.
Answer: C
NEW QUESTION # 12
What is the purpose of a VRRP-A floating-IP address?
- A. To provide a single IP to manage all VRRP-A devices in the set.
- B. To provide a single next hop IP address for uplink and downlink devices.
- C. To use as source IP address for VRRP-A hellos.
- D. To serve as a tie-breaker when selecting a VRRP-A owner.
Answer: B
NEW QUESTION # 13
Which VRID priority scheme will implement an Active-Active-Active VRRP-A deployment with three ACOS devices?
- A. 0
- B. 1
- C. 2
Answer: B
NEW QUESTION # 14
ACOS can log the following accounting records for administrative sessions:
- A. device access and command entry attempts
- B. syslog errors of severity greater than a specified level
- C. device access attempts only
- D. syslog errors of a specified severity level
- E. command entry attempts only
Answer: A
NEW QUESTION # 15
Given the following "show vcs summary" output, which statements are true about the virtual chassis set?
(Choose three.)
- A. The aVCS vMaster of the set can always be accessed at IP Address 224.0.0.210.
- B. Three devices were configured as part of the virtual chassis.
- C. The command was run from the aVCS vMaster.
- D. This is aVCS set-id 1.
- E. The command was run from device 3 of the set.
- F. The aVCS vMaster of the group can always be accessed at IP Address 1.0.0.1.
Answer: B,D,E
NEW QUESTION # 16
What information is typically submitted with every aXAPI call after the initial login is complete?
- A. Log file location
- B. The programming language being used
- C. Authorization header with signature
- D. The ACOS device serial number
- E. The AXAPI special permission XML file
Answer: C
NEW QUESTION # 17
Which statement correctly describes the following configuration?
snmp enable traps slb-change server
snmp enable traps slb-change server-port
snmp enable traps slb-change vip
snmp enable traps slb-change vip-port
- A. These commands only enable SNMP traps for the creation or removal of virtual and real servers and ports
- B. These commands enable SNMP traps for any SLB changes
- C. These commands enable SNMP traps for only SLB changes related to virtual-server
- D. These commands enable SNMP traps for only SLB changes related to real-servers
Answer: A
NEW QUESTION # 18
Given the following VRID 2 configuration, which device will host the VRID after the three devices at the same time?
- A. Device 2
- B. The VRID will be hosted on all three devices at the same time.
- C. Device 1
- D. Device 3
- E. VCS will randomly assign the VRID to a device based on the uptime of the device.
Answer: C
NEW QUESTION # 19
In the following configuration:
Where network 3.0.0.x on each device is on a VE interface dedicated to aVCS traffic, what must you do to ensure that command "device-context x" always succeeds?
- A. Verify the interface is untagged on each device.
- B. Enable management service ssh on that interface for each device.
- C. Configure vcs floating-ip on network 3.0.0.0 /24.
- D. Apply acl "permit 3.0.0.0 /24" on that interface for each device.
Answer: C
NEW QUESTION # 20
Which three items does aXAPI require to configure an ACOS object (such as an SLB object)? (Choose three.)
- A. Encrypted connection to device
- B. Device's serial number
- C. Device's VIP URL
- D. Authorization signature
- E. Endpoint with parameters
- F. Device's management/data IP
Answer: A,D,F
NEW QUESTION # 21
Which commands display the ACOS device serial number? (Choose two.)
- A. show version
- B. show serial
- C. show system
- D. show environment
- E. show hardware
Answer: A,E
NEW QUESTION # 22
......
A10-System-Administration Exam Questions Get Updated [2026] with Correct Answers: https://www.prep4surereview.com/A10-System-Administration-latest-braindumps.html
Pass A10-System-Administration Exam - Real Questions and Answers: https://drive.google.com/open?id=1ka8oingl4kD9m-DTM7h2fkR9TBkDkoFi
