[Nov 11, 2025] Pass CCNP Security 300-715 Exam With 308 Questions
Ultimate Guide to Prepare Free Cisco 300-715 Exam Questions and Answer
Cisco ISE is a comprehensive identity and access control policy platform that provides secure network access for end-users on any device in any location. It integrates with other Cisco security tools to enforce security policies, control network access, and provide visibility into network activity. 300-715 exam covers a broad range of topics, including fundamental ISE architecture, implementation, configuration, and management.
NEW QUESTION # 35
Which two events trigger a CoA for an endpoint when CoA is enabled globally for ReAuth? (Choose two.)
- A. endpoint profile transition from Aop.e-dev.ee to Apple-iPhone
- B. endpoint profile transition from Unknown to Windows 10-Workstation
- C. addition of endpoint to My Devices Portal
- D. endpoint marked as lost in My Devices Portal
- E. updating of endpoint dACL.
Answer: A,B
NEW QUESTION # 36
What gives Cisco ISE an option to scan endpoints for vulnerabilities?
- A. authorization policy
- B. authorization profile
- C. authentication policy
- D. authentication profile
Answer: B
NEW QUESTION # 37
What is a difference between RADIUS compared to TACACS+?
- A. RADIUS separates AAand TACACS+ combines authentication and authorization.
- B. RADIUS uses UDP ports 1812 and 1813. and TACACS+ uses UDP ports 1645 and 1646
- C. RADIUS encrypts passwords only, and TACACS+ encrypts all packets.
- D. RADIUS has multiprotocol support, and TACACS+ supports only IP
Answer: C
NEW QUESTION # 38
What are two requirements of generating a single certificate in Cisco ISE by using a certificate provisioning portal, without generating a certificate signing request? (Choose two.)
- A. Enter the common name.
- B. Choose the hashing method.
- C. Enter the IP address of the device.
- D. Select the certificate template.
- E. Locate the CSV file for the device MAC.
Answer: A,D
Explanation:
Section: Policy Enforcement
Explanation/Reference: https://www.cisco.com/c/en/us/support/docs/security/identity-services-engine/200534-ISE-2-0- Certificate-Provisioning-Portal.html
NEW QUESTION # 39
When configuring an authorization policy, an administrator cannot see specific Active Directory groups present in their domain to be used as a policy condition.
However, other groups that are in the same domain are seen. What is causing this issue?
- A. Cisco ISE's connection to the AD join point is failing
- B. The groups are present but need to be manually typed as conditions
- C. Cisco ISE only sees the built-in groups, not user created ones
- D. The groups are not added to Cisco ISE under the AD join point
Answer: D
NEW QUESTION # 40
There are several devices on a network that are considered critical and need to be placed into the ISE database and a policy used for them. The organization does not want to use profiling. What must be done to accomplish this goal?
- A. Enter the IP address in the correct Logical Profile.
- B. Enter the MAC address in the correct Logical Profile.
- C. Enter the IP address in the correct Endpoint Identity Group.
- D. Enter the MAC address in the correct Endpoint Identity Group.
Answer: D
NEW QUESTION # 41
Which statement is not correct about the Cisco ISE Monitoring node?
- A. Cisco ISE supports distributed log collection across all nodes to optimize local data collection, aggregation, and centralized correlation and storage.
- B. The local collector agent process runs only the Inline Posture node.
- C. The local collector agent collects logs locally from itself and from any NAD that is configured to send logs to the Policy Service node.
- D. The local collector buffers transport the collected data to designated Cisco ISE Monitoring nodes as syslog; once Monitoring nodes are globally defined via Administration, ISE nodes automatically send logs to one or both of the configured Monitoring nodes.
Answer: B
NEW QUESTION # 42
Drag the steps to configure a Cisco ISE node as a primary administration node from the left into the correct order on the night.
Answer:
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/security/ise/2-4/admin_guide/b_ise_admin_guide_24/b_ise_admin_guide Step 1 Choose Administration > System > Deployment.
The Register button will be disabled initially. To enable this button, you must configure a Primary PAN.
Step 2
Check the check box next to the current node, and click Edit.
Step 3
Click Make Primary to configure your Primary PAN.
Step 4
Enter data on the General Settings tab.
Step 5
Click Save to save the node configuration.
NEW QUESTION # 43
An engineer is configuring a virtual Cisco ISE deployment and needs each persona to be on a different node. Which persona should be configured with the largest amount of storage in this environment?
- A. Platform Exchange Grid
- B. Monitoring and Troubleshooting
- C. Primary Administration
- D. policy Services
Answer: B
Explanation:
https://www.cisco.com/c/en/us/td/docs/security/ise/2-
1/install_guide/b_ise_InstallationGuide21/b_ise_InstallationGuide21_chapter_011.html
NEW QUESTION # 44
An employee logs on to the My Devices portal and marks a currently on-boarded device as `Lost'.
Which option is correct?
- A. The device status is updated to Stolen
- B. BYOD Registration status is updated to Unknown.
- C. BYOD Registration status is updated to No
- D. The device access has been denied
- E. Certificates provisioned to the device are not revoked
Answer: C,E
Explanation:
https://www.cisco.com/c/en/us/td/docs/security/ise/2-
2/admin_guide/b_ise_admin_guide_22/b_ise_admin_guide_22_chapter_01111.html
NEW QUESTION # 45
The default Cisco ISE node configuration has which role or roles enabled by default?
- A. Administration and Pokey Service
- B. Administration only
- C. Inline Posture only
- D. Policy Service Monitoring, and Administration
Answer: D
NEW QUESTION # 46
Which two components are required for creating a Native Supplicant Profile within a BYOD flow?
(Choose two)
- A. iOS Settings
- B. Connection Type
- C. Redirect ACL
- D. Windows Settings
- E. Operating System
Answer: B,E
Explanation:
https://www.cisco.com/c/en/us/td/docs/security/ise/2-
1/admin_guide/b_ise_admin_guide_21/b_ise_admin_guide_20_chapter_01111.html
NEW QUESTION # 47
An engineer is deploying Cisco ISE in a network that contains an existing Cisco Secure Firewall ASA. The customer requested that Cisco TrustSec be configured so that Cisco ISE and the firewall can share SGT information.
Which protocol must be configured on Cisco ISE to meet the requirement?
- A. pxGrid
- B. SXP
- C. PAC
- D. RADIUS
Answer: B
NEW QUESTION # 48
An administrator must configure Cisco ISE to authenticate the administrative superuser to manage a Cisco Adaptive Security Appliance firewall. The solution must meet the requirements:
- The user must be authenticated against Microsoft AD.
- The user must have full management administrative access to the Cisco Adaptive Security Appliance firewall.
- The user must not use the enable command.
The configurations were performed:
- joined Cisco ISE to AD and retrieved AD groups
- added the Cisco Adaptive Security Appliance firewall
- enabled Device Admin Service in Cisco ISE
- configured TACACS command sets
- configured a TACACS profile
- configured an authorization policy
- configured the Cisco Adaptive Security Appliance firewall for
authentication and authorization
Which two actions must be performed in Cisco ISE? (Choose two.)
- A. Add all authorized admin commands to the TACACS profile.
- B. Set Default Privilege to 1 and Maximum Privilege to 15 in the TACACS profile.
- C. Select "Permit any command that is not listed below" in the TACACS profile.
- D. Set Default Privilege to 15 and Maximum Privilege to 15 in the TACACS profile.
- E. Configure an authentication profile on Cisco ISE.
Answer: A,B
NEW QUESTION # 49
An engineer needs to configure a Cisco ISE server to issue a CoA for endpoints already authenticated to access the network. The CoA option must be enforced on a session, even if there are multiple active sessions on a port. What must be configured to accomplish this task?
- A. the Port Bounce CoA option in the Cisco ISE system profiling settings enabled
- B. an endpoint profiling policy with the No CoA option enabled
- C. an endpoint profiling policy with the Port Bounce CoA option enabled
- D. the Reauth CoA option in the Cisco ISE system profiling settings enabled
Answer: D
NEW QUESTION # 50
Which two VMware features are supported on a Cisco ISE virtual appliance? (Choose two.)
- A. VM hardware version 7+
- B. VM snapshots
- C. OVF support
- D. multivendor integration
- E. VM cold migration
Answer: A,C
NEW QUESTION # 51
An administrator is configuring TACACS+ on a Cisco switch but cannot authenticate users with Cisco ISE. The configuration contains the correct key of Cisc039712287. but the switch is not receiving a response from the Cisco ISE instance What must be done to validate the AAA configuration and identify the problem with the TACACS+ servers?
- A. Test the user account on the server using the test aaa group radius server CUCS user admin pass <key> legacy command.
- B. Conrm the authorization policies are correct using the test aaa authorization admin drop legacy command.
- C. Validate that the key value is correct using the test aaa authentication admin <key> legacy command.
- D. Check for server reachability using the test aaa group tacacs+ admin <key> legacy command.
Answer: D
Explanation:
https://medium.com/training-course-ccna-security-210-260/ccna-security-part-3-implementing-aaa-in-cisco-ios-4b13ab285f51
NEW QUESTION # 52
An administrator must deploy the Cisco Secure Client posture agent to employee endpoints that access a wireless network by using URL redirection in Cisco ISE. The compliance module must be downloaded from Cisco and uploaded to the Cisco ISE client provisioning resource. What must be used to upload the compliance module?
- A. agent resources from the local disk
- B. Client Provisioning Portal
- C. Secure Client configuration
- D. Secure Client posture profile
Answer: A
NEW QUESTION # 53
......
Implementing and Configuring Cisco Identity Services Engine Practice Tests 2025 | Pass 300-715 with confidence!: https://drive.google.com/open?id=1Zw0f9I0Y8sU-gqWXoI2gPw-JnDyproIF
Pass 300-715 Tests Engine pdf - All Free Dumps: https://www.prep4surereview.com/300-715-latest-braindumps.html
