[2023] Verified NSE5_FAZ-7.0 Dumps Q&As - 1 Year Free & Quickly Updates
Latest 2023 Realistic Verified NSE5_FAZ-7.0 Dumps - 100% Free NSE5_FAZ-7.0 Exam Dumps
NEW QUESTION # 49
You are using RAID with a FortiAnalyzer that supports software RAID, and one of the hard disks on FortiAnalyzer has failed.
What is the recommended method to replace the disk?
- A. Perform a hot swap
- B. Clear all RAID alarms and replace the disk while FortiAnalyzer is still running
- C. Shut down FortiAnalyzer and then replace the disk
- D. Downgrade your RAID level, replace the disk, and then upgrade your RAID level
Answer: C
Explanation:
https://community.fortinet.com/t5/FortiAnalyzer/Technical-Note-How-to-swap-Hard-Disk-on-FortiAnalyzer/ta-p/194997?externalID=FD41397#:~:text=If%20a%20hard%20disk%20on,process%20known%20as%20hot%20swapping
NEW QUESTION # 50
Which SQL query is in the correct order to query the database in the FortiAnslyzer?
- A. SELECT devid FROM Slog- WHERE *user' =' USERl' GROUP BY devid
- B. SELECT devid FROM Slog GROOP BY devid WHERE * user' =* USERl'
- C. SELECT devid WHERE 'u3er'='USERl' FROM $ log GROUP BY devid
- D. FROM Slog WHERE 'user* =' USERl' SELECT devid GROUP BY devid
Answer: A
Explanation:
FortiAnalyzer_7.0_Study_Guide-Online.pdf page 259: The main clauses FortiAnalyzer reports use are as follows:
* FROM
* WHERE
* GROUP BY
* ORDER BY
* LIMIT
* OFFSET
Accordingly, following the SELECT keyword, the statement must be followed by one or more clauses in the order in which they appear in the table shown on this slide.
NEW QUESTION # 51
What is the purpose of output variables?
- A. To display details of the connectors used by a playbook
- B. To save all the task settings when a playbook is exported
- C. To use the output of the previous task as the input of the current task
- D. To store playbook execution statistics
Answer: C
Explanation:
FortiAnalyzer_7.0_Study_Guide-Online.pdf page 242: Output variables allow you to use the output from a preceding task as an input to the current task.
"Output variables allow you to use the output from a preceding task as an input to the current task." FortiAnalyzer_7.0_Study_Guide-Online page 242
NEW QUESTION # 52
You need to upgrade your FortiAnalyzer firmware.
What happens to the logs being sent to FortiAnalyzer from FortiGate during the time FortiAnalyzer is temporarily unavailable?
- A. The logfiled process stores logs in offline mode
- B. FortiGate uses the miglogd process to cache the logs
- C. FortiAnalyzer uses log fetching to retrieve the logs when back online
- D. Logs are dropped
Answer: B
NEW QUESTION # 53
Refer to the exhibit.
Which statement is correct regarding the event displayed?
- A. An incident was created from this event.
- B. The security risk was blocked or dropped.
- C. The security event risk is considered open.
- D. The risk source is isolated.
Answer: B
NEW QUESTION # 54
What is the purpose of output variables?
- A. To display details of the connectors used by a playbook
- B. To store playbook execution statistics
- C. To use the output of the previous task as the input of the current task
- D. To save all the task settings when a playbook is exported
Answer: B
NEW QUESTION # 55
The admin administrator is failing to register a FortiClient EMS on the FortiAnalyzer device.
What can be the reason for this failure?
- A. ADOMs are not enabled on FortiAnalyzer.
- B. ADOM mode should be set to advanced, in order to register the FortiClient EMS device.
- C. A separate license is required on FortiAnalyzer in order to register the FortiClient EMS device.
- D. FortiAnalyzer is in an HA cluster.
Answer: A
NEW QUESTION # 56
Which daemon is responsible for enforcing the log file size?
- A. ofrpd
- B. logfiled
- C. sqlplugind
- D. miglogd
Answer: B
NEW QUESTION # 57
Which two elements are contained in a system backup created on FortiAnalyzer? (Choose two.)
- A. Report information
- B. Database snapshot
- C. Logs from registered devices
- D. System information
Answer: C,D
NEW QUESTION # 58
In Log View, you can use the Chart Builder feature to build a dataset and chart based on the filtered search results.
Similarly, which feature you can use for FortiView?
- A. Export to Custom Chart
- B. Export to PDF
- C. Export to Report Chart
- D. Export to Chart Builder
Answer: C
Explanation:
Reference:
Similar to the Chart Builder feature in Log View, you can export a chart from a FortiView. The chart export includes any filters you set on the FortiView. FortiAnalyzer_7.0_Study_Guide-Online pag. 292.
NEW QUESTION # 59
Which FortiAnalyzer feature allows you to retrieve the archived logs matching a specific timeframe from another FortiAnalyzer device?
- A. Log forwarding an aggregation mode
- B. Log fetching
- C. Indicators of Compromise
- D. Log upload
Answer: B
Explanation:
https://docs.fortinet.com/document/fortianalyzer/6.2.0/administration-guide/651442/fetcher-management
NEW QUESTION # 60
Why should you use an NTP server on FortiAnalyzer and all registered devices that log into FortiAnalyzer?
- A. To use real-time forwarding
- B. To properly correlate logs
- C. To improve DNS response times
- D. To resolve host names
Answer: B
Explanation:
NEW QUESTION # 61
What is the purpose of employing RAID with FortiAnalyzer?
- A. To provide data separation between ADOMs
- B. To introduce redundancy to your log data
- C. To separate analytical and archive data
- D. To back up your logs
Answer: B
Explanation:
https://en.wikipedia.org/wiki/RAID#:~:text=RAID%20(%22Redundant%20Array%20of%20Inexpensive,%2C%20performance%20improvement%2C%20or%20both.
NEW QUESTION # 62
Which FortiAnalyzer feature allows you to use a proactive approach when managing your network security?
- A. FortiView Monitor
- B. Incidents dashboards
- C. Outbreak alert services
- D. Threat hunting
Answer: D
NEW QUESTION # 63
Which statements are true regarding securing communications between FortiAnalyzer and FortiGate with IPsec? (Choose two.)
- A. Must configure the FortiAnalyzer end of the tunnel only--the FortiGate end is auto-negotiated.
- B. Must establish an IPsec tunnel ID and pre-shared key.
- C. IPsec cannot be enabled if SSL is enabled as well.
- D. IPsec is only enabled through the CLI on FortiAnalyzer.
Answer: C
NEW QUESTION # 64
......
The NSE5_FAZ-7.0 exam is intended for network administrators, security professionals, and anyone responsible for managing network security operations. The exam is also suitable for individuals who want to enhance their knowledge and skills in network security and Fortinet's products. The exam is a prerequisite for the Fortinet NSE 5 certification, which validates the candidate's ability to use Fortinet's security products to protect networks against threats and vulnerabilities.
NSE5_FAZ-7.0 Dumps PDF and Test Engine Exam Questions: https://www.prep4surereview.com/NSE5_FAZ-7.0-latest-braindumps.html
Get 2023 Updated Free Fortinet NSE5_FAZ-7.0 Exam Questions and Answer: https://drive.google.com/open?id=1vrRGl7SgVe1VxHkWjrxMHG9Aw67g8TiS
