Latest [Jan 17, 2024] Real Cisco 300-430 Exam Dumps Questions
300-430 Dumps To Pass CCNP Enterprise Exam in One Day (Updated 218 Questions)
Cisco 300-430 exam consists of 60-70 questions that must be completed within 90 minutes. 300-430 exam is available in English and Japanese languages. 300-430 exam can be taken at any Pearson VUE testing center around the world. Candidates are required to register for the exam and pay an exam fee to Pearson VUE to schedule their exam.
Cisco 300-430 exam is a computer-based test that consists of multiple-choice questions. 300-430 exam duration is 90 minutes, and the passing score is 750 out of 1000. Cisco recommends that candidates have at least three to five years of experience in implementing enterprise wireless networks before taking the exam. Additionally, candidates should have a good understanding of Cisco wireless technologies and solutions.
To pass the Cisco 300-430 exam, candidates must have a solid understanding of wireless networking concepts, including RF fundamentals, wireless LAN technologies, and wireless security protocols. They must also be familiar with Cisco's wireless network solutions, including the Cisco Unified Wireless Network architecture, Cisco Prime Infrastructure, and Cisco Mobility Services Engine. 300-430 exam consists of 60-70 multiple-choice questions and lasts for 90 minutes. Candidates must achieve a passing score of 750 out of 1000 to earn the certification. The Cisco 300-430 certification is valid for three years, after which candidates must recertify to maintain their certification status.
NEW QUESTION # 129
A wireless engineer must implement a corporate wireless network for a large company in the most efficient way possible. The wireless network must support 32 VLANs for 300 employees in different departments.
Which solution must the engineer choose?
- A. Configure different AP groups to support different VLANs, so that all of the WLANs can be broadcast on both radios.
- B. Configure a second WLC to support half of the APs in the deployment.
- C. Configure one single SSID and implement Cisco ISE for VLAN assignment according to different user roles.
- D. Configure 16 WLANs to be broadcast on the 2.4-GHz band and 16 WLANs to be broadcast on the 5.0-GHz band.
Answer: C
Explanation:
NEW QUESTION # 130
Which three things do you need to consider prior to performing a wireless site survey? (Choose three.)
- A. The time required to utilize the design mode in Cisco WCS to prepare a preliminary WLAN design to reduce on-site survey time.
- B. The type of wireless survey tools required to perform the site survey.
- C. The time required to assess customer WLAN density and throughput requirements.
- D. The time required to survey each potential AP location.
- E. The time required to assess application server locations at the customer facility.
- F. The time required to acquire any additional infrastructure components.
Answer: B,C,D
NEW QUESTION # 131
An engineer must achieve the highest level of location accuracy possible for a new mobile application. Which technology must be implemented for this use case?
- A. RSS lateration
- B. Time Difference of Arrival
- C. Bluetooth Low Energy
- D. ToA lateration
Answer: B
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/solutions/Enterprise/Mobility/WiFiLBSDG/wifich2.html
NEW QUESTION # 132
What must be configured on the Global Configuration page of the WLC for an access point to use 802.1x to authenticate to the wired infrastructure?
- A. TACACS server IP address.
- B. local access point credentials
- C. supplicant credentials
- D. RADIUS shared secret
Answer: D
Explanation:
NEW QUESTION # 133
What is configured to use more than one port on the OEAP to extend the wired network's?
- A. AAA override
- B. remote LAN
- C. client load balancing
- D. remote LAN ACL
Answer: B
Explanation:
NEW QUESTION # 134
An engineer must implement intrusion protection the WLAN. The AP coverage is adequate and on-channel attacks are the primary concern. The building is historic, which makes adding APs difficult. Which Ap mode and submode must be implemented?
- A. Ap mode: local, Ap submode: none
- B. Ap mode: monitor, Ap submode: WIPS
- C. Ap mode: local, Ap submode: WIPS
- D. Ap mode: monitor, Ap submode: none
Answer: C
Explanation:
NEW QUESTION # 135
An IT department receives a report of a stolen laptop and has information on the MAC address of the laptop. Which two settings must be set on the wireless infrastructure to determine its location? (Choose two.)
- A. Client location tracking must be enabled on the MSE.
- B. Tracking optimization must be enabled on the WLC.
- C. Location History for Rogue APs & Rogue Clients must be enabled on the MSE.
- D. Location History for Visitors must be enabled on the MSE.
- E. Location History for Clients must be enabled on the MSE.
Answer: B,E
NEW QUESTION # 136
Refer to the exhibit.
A network administrator deploys the DHCP profiler service in two ISE servers: 10.3.10.101 and 10.3.10.102. All BYOD devices connecting to WLAN on VLAN63 have been incorrectly profiled and are assigned as unknown profiled endpoints. Which action efficiently rectifies the issue according to Cisco recommendations?
- A. Disable DHCP proxy on the Cisco WL
- B. Disable DHCP proxy on the Cisco WLC and run the ip helper-address command under the VLAN interface to point to DHCP and the two ISE servers.
- C. Keep DHCP proxy enabled on the Cisco WLC and define helper-address under the VLAN interface to point to the two ISE servers.
- D. Nothing needed to be added on the Cisco WLC or VLAN interface. The ISE configuration must be fixed.
Answer: B
Explanation:
https://www.cisco.com/c/en/us/support/docs/wireless/4400-series-wireless-lan-controllers/110865-dhcp-wlc.html
NEW QUESTION # 137
Refer to the exhibit.
Which two items must be supported on the VoWLAN phones to take full advantage of this WLAN configuration? (Choose two.)
- A. WMM
- B. 802.11e
- C. APSD
- D. SIFS
- E. TSPEC
Answer: A,B
NEW QUESTION # 138
An engineer is configuring a new wireless network for guest access. The Facebook page of the company must be viewed by the guest users before they get access to the network. A Cisco MSE is used as a wireless component Which URL must be used in the configuration as the external redirection URL?
- A. Error! Hyperlink reference not valid.
- B. Error! Hyperlink reference not valid.
- C. Error! Hyperlink reference not valid. 8083/visitor/login.do
- D. Error! Hyperlink reference not valid.
Answer: D
NEW QUESTION # 139
An engineer must create an account to log in to the CLI of an access point for troubleshooting. Which configuration on the WLC will accomplish this?
- A. Global Configuration Enable Password
- B. ReadWrite User Access Mode
- C. SNMP V3 User
- D. Allow New Telnet Sessions
Answer: A
Explanation:
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-4/configuration/guides/consolidated/b_cg74_CONSOLIDATED/b_cg74_CONSOLIDATED_chapter_01101011.html
NEW QUESTION # 140
What is an important consideration when implementing a dual SSID design for BYOD?
- A. SSIDs for this setup must be configured with NAC State-RADIUS NAC for the clients to authenticate with Cisco ISE, or with NAC State-ISE NAC for Cisco ISE to associate the client.
- B. If multiple WLCs are used, the WLAN IDs must be exact for the clients to be provisioned and traverse the network correctly.
- C. After using the provisioning SSID, an ACL that used to make the client switch SSIDs forces the user to associate and traverse the network by MAC filtering.
- D. One SSID is for provisioning and the other SSID is for gaining access to the network. The use of an ACL should not be enforced to make the client connect to the REAL SSID after provisioning.
Answer: D
Explanation:
NEW QUESTION # 141
An engineer must implement intrusion protection the WLAN. The AP coverage is adequate and on-channel attacks are the primary concern. The building is historic, which makes adding APs difficult. Which Ap mode and submode must be implemented?
- A. Ap mode: local, Ap submode: none
- B. Ap mode: monitor, Ap submode: WIPS
- C. Ap mode: local, Ap submode: WIPS
- D. Ap mode: monitor, Ap submode: none
Answer: C
Explanation:
NEW QUESTION # 142
An engineer must configure Cisco OEAPs for three executives. As soon as the NAT address is configured on the management interface, it is noticed that the WLC is not responding for APs that are trying to associate to the internal IP management address. Which command should be used to reconcile this?
- A. config network ap-discovery nat-ip-only disable
- B. config flexconnect office-extend nat-ip-only disable
- C. config flexconnect office-extend nat-ip-only enable
- D. config network ap-discovery nap-ip-only enable
Answer: A
Explanation:
Explanation
https://community.cisco.com/t5/wireless/office-extend-ap-and-external-addresses/td-p/3742395
NEW QUESTION # 143
An engineer must configure a Cisco WLC to support Cisco Aironet 600 Series OfficeExtend APs. Which two Layer 2 security options are supported in this environment? (Choose two.)
- A. CKIP
- B. Static WEP + 802.1X
- C. WPA+WPA2
- D. Static WEP
- E. 802.1X
Answer: C,D
Explanation:
NEW QUESTION # 144
A network engineer observes a spike in controller CPU overhead and overall network utilization after multicast is enabled on a controller with 500 APs. Which feature connects the issue?
- A. unicast AP multicast mode
- B. broadcast forwarding
- C. controller IGMP snooping
- D. multicast AP multicast mode
Answer: A
NEW QUESTION # 145
An engineer is implementing a FlexConnect group for access points at a remote location using local switching but central DHCP. Which client feature becomes available only if this configuration is changed?
- A. multicast
- B. static IP
- C. mDNS
- D. fast roaming
Answer: B
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-7/config-guide/b_cg87/flexconnect.html
NEW QUESTION # 146
An engineer must provide a graphical report with summary grouped data of the total number of wireless clients on the network Which Cisco Prime Infrastructure report provides the requited data?
- A. Client Summary
- B. Posture Status Count
- C. Client Traffic Stream Metrics
- D. Mobility Client Summary
Answer: D
NEW QUESTION # 147
A network administrator managing a Cisco Catalyst 9800 WLC must place all iOS connected devices to the guest SSID on VLAN 101. The rest of the clients must connect on VLAN 102 distribute load across subnets. To achieve this configuration, the administrator configures a local policy on the WLC. Which two configurations are required? (Choose two.)
- A. Assign a policy map under global security policy settings.
- B. Create a service template.
- C. Enable device classification on global wireless settings.
- D. Add local profiling policy under global security policy settings.
- E. Allow HTTP and DHCP profiling under policy map.
Answer: B,C
NEW QUESTION # 148
An IT team is growing quickly and needs a solution for management device access. The solution must authenticate users from an external repository instead of the current local on the WLC, and it must also identify the user and determine what level of access users should have. Which protocol do you recommend to achieve these goals?
- A. RADIUS
- B. LDAP
- C. TACACS+
- D. network policy server
Answer: C
Explanation:
https://www.cisco.com/c/en/us/td/docs/switches/lan/Denali_161/ConfigExamples_Technotes/Techzone_Articles/Example_and_Technotes_Denali_16_1_1/Example_and_Technotes_Denali_16_1_1_chapter_010110.pdf
https://community.cisco.com/t5/wireless-mobility-documents/wlc-and-acs-5-x-tacacs-configuration-example-web-authentication/ta-p/3120681
NEW QUESTION # 149
A network engineer wants to implement QoS across the network that support multiple VLANs. All the Aps are connected to switch ports and are configured in local mode. Which trust model must be configured on the switch ports to which the Aps are connected?
- A. WMM UP
- B. DSCP
- C. IPP
- D. CoS
Answer: B
NEW QUESTION # 150
An engineer must track guest traffic flow using the WLAN infrastructure. Which Cisco CMX feature must be configured and used to accomplish this tracking?
- A. detect and locate.
- B. analytics
- C. connect and engage
- D. presence
Answer: D
Explanation:
NEW QUESTION # 151
An engineer is implementing Cisco Identity-Based Networking on a Cisco AireOS controller. The engineer has two ACLs on the controller. The first ACL, named BASE_ACL, is applied to the corporate_clients interface on the WLC, which is used for all corporate clients. The second ACL, named HR_ACL, is referenced by ISE in the Human Resources group policy. What is the resulting ACL when a Human Resources user connects?
- A. HR_ACL only
- B. BASE_ACL appended with HR_ACL
- C. BASE_ACL only
- D. HR_ACL appended with BASE_ACL
Answer: A
NEW QUESTION # 152
......
300-430 Exam Brain Dumps - Study Notes and Theory: https://www.prep4surereview.com/300-430-latest-braindumps.html
100% Guaranteed Results 300-430 Unlimited 218 Questions: https://drive.google.com/open?id=1EV7Z5ea62eYe6ThzIKt-2fjNI1_fM76b
