Latest Oct 01, 2022 CTFL-AuT Brain Dump: A Study Guide with Tips & Tricks for passing Exam
CTFL-AuT Question Bank: Free PDF Download Recently Updated Questions
NEW QUESTION 23
As a unit tester (.module tester'') you are working on a project and are supposed to develop a test strategy.
Which of the following test and analysis procedures is. according to Automotive SPICNOT an appropriate clamant of a verification strategy for unit tests (software units), which ware "manually coded"?
Note The components to verify are non-safety relevant and safely relevant (up to ASlL-C) components
- A. Code-Reviews
- B. Hardware-in-the-Loop-Tests
- C. Tool supported static analysis
- D. Unit tests (Test of Software-Units)
Answer: C
NEW QUESTION 24
Which test documentis required according to Automotive SPICE?
- A. Test procedure specification
- B. Test management report
- C. Load testing report
- D. Test metrics report
Answer: A
NEW QUESTION 25
Which Automotive Safety Integrity Levels does ISO 26262 describe?
- A. N (None), P (Partly). L (Largely). F (Fully)
- B. QM, ASH A, ASIL B, ASIL C, ASIL D
- C. ASIL A, ASIL B, ASIL C, ASIL D
- D. MlL, SiL, PiL, HiL, ViL
Answer: C
Explanation:
Explanation
There are four ASILs identified by ISO 26262A, B, C, and D. ASIL A represents the lowest degree and ASIL D represents the highest degree of automotive hazard.
https://www.synopsys.com/automotive/what-is-asil.html#:~:text=There%20are%20four%20ASILs%20identified
NEW QUESTION 26
According to Automotive SPICE3.x, which statement regarding the requirements for a test strategy Is correct?
- A. Thetestlogs should be automated on all lest levels as much as possible to increase the comparability of the test results and reduce the effort for the lest execution.
- B. Thetest log must Include methods for test case creation. for the selection of test cases, for the creation of test data and for the lest execution
- C. Thetest report must describe the test process including the identification of menaces and dependencies from other processes.
- D. In the regression testing strategy, methods must be defined for an impact analysis and the selection of appropriate test cases for regression testing
Answer: B
NEW QUESTION 27
Which statement regarding the comparison of the test levels In ISO 26262, ASPICE and CTFL Is true?
- A. The following lest levels are equivalent: acceptance test (CTFL). ISO 26262 safety validation (ISO
26262.4-9) and system integration test (ASPICE SYS.4), - B. The following test levels are equivalent: component test (CTFL), software unit test (ISO 26262.6-9) and software component verification (ASPICE. SVYE.4).
- C. ASPICE and ISO 26262 do not have an equivalent for system testing (CTFL).
- D. CTFL, ASPICE and ISO 26262 use the term .system' for a product consisting of a hardware and a software component
Answer: B
NEW QUESTION 28
Which statement regarding the contribution of the tester to a safety culture is true?
- A. The tester creates the hardware-software interface and provides this document to the safety manager
- B. The tester always takes the overall context of the product development Into account when she/he executes their tasks
- C. In systems that could potentially lead to physical injury or damage to the health of people the tester analyses potential hazards.
- D. The tester performs the hazard analysis and the risk assessment for the product at the beginning of the project.
Answer: D
NEW QUESTION 29
Which statement regarding the design of a MIL test environment Is TRUE?
- A. To execute the tests, the tester needs a computer and the correspond^) simulation software, including the environmental model.
- B. Interface and integration tests are two test types or test levels that can only be applied in a Mil test environment.
- C. The test environment includes a real time capable computer, which can capture ail relevant signals r time
- D. In the MIL test environments, the simulation time runs in real time because the software is running on real hardware.
Answer: B
NEW QUESTION 30
During product development what does the tester create based on the Safety requirements?
- A. Test cases to check compliance with the MISRA-C:2012 coding standard
- B. Test cases and test procedure for the verification and validation of the safety related requirements
- C. Test cases and test procedures for production
- D. A software architecture that fulfils the requirement of .testability
Answer: D
NEW QUESTION 31
Which statement about databases is INCORRECT?
- A. Databases can be described using ASAM-standards
- B. Databases include information about input and output signals.
- C. Databases describe the signals of a communication channel.
- D. Databases define the implementation of the communication protocol
Answer: C
NEW QUESTION 32
You are working as a .module tester* (syn.unit tester, component tester) inan automotive project for thedevelopment of a control unit for an electric window. During white-box lest design, you come atomic requirements: B1 AND (B2 OR B3). The task for you is to design test cases according to the principleof the modified condition/decision testing (MOOC). You have already designed three test cases:
1) B1 = TRUE, B2 = TRUE, B3 = FALSE
2) B1 = TRUE, B2 = FALSE, B3 = TRUE
3) B1 = FALSE, B2 = TRU, B3 = FALSE
Which of the following test cases is necessary to achieve 100% modified condition/decision coverage?
- A. B1 = FALSE, 62 = FALSE, B3 = TRUE
- B. B1= TRUE, B2 = TRUE. B3 = TRUE
- C. B1 = TRUE, B2 = FALSE, B3 = FALSE
- D. B1 = FALSE, B2 = FALSE, B3 = FALSE
Answer: A
NEW QUESTION 33
In which volume of ISO 26262 does the tester find requirements and recommendations for test- and verification-specific aspects of the SOFTWARE level?
- A. Volume 6 (ISO 26262-6)
- B. Volume 6 (ISO 262624)
- C. Volume 4 (ISO 26262-4)
- D. Volume 7 (ISO 26262-7)
Answer: A
NEW QUESTION 34
Which of the following statements regarding the application of standards is true?
- A. The application of standards primarily alms at reducing costs.
- B. The application of standards helps to create transparent communication between the project stakeholders.
- C. The application of standards which standardize products has the sole purpose to reduce project risks
- D. The application of standards reduces the efficiency of agile projects
Answer: B
NEW QUESTION 35
Which constraints does a SiL test environment have?
- A. Numerous internal signals of the test object can be stimulated or observed.
- B. Electric error scenarios can be tested early.
- C. The test execution can be paused anytime for further analyses.
- D. In the SiL environment the simulation time is generally shorter than the real time.
Answer: B
NEW QUESTION 36
In Automotive SPICIE. which capability level in software Integration testing is characterized by the following statement: ,,Define the objectives for the execution of the process.''
- A. Capability level 3
- B. Capability level 1
- C. Capability level 0
- D. Capability level 2
Answer: B
Explanation:
Explanation
https://www.automotivespice.com/fileadmin/software-download/Automotive_SPICE_PAM_30.pdf
NEW QUESTION 37
Which statement regarding AUTOSAR Is TRUE?
AUTOSAR describes...
- A. ...an analysis unit, which processes Input signals and determines intermediate values and their respective output signals by using existing information.
- B. ...a collection of characteristics of the performance of processes of an organization.
- C. ...activities, methods and measures to achieve functional security for electric and electronic solutions.
- D. ...an open and standardized software architecture for vehicle development.
Answer: D
Explanation:
Explanation
https://www.pathpartnertech.com/software-architecture-autosar-for-automotive-embedded-system/
NEW QUESTION 38
Which of the following statements regarding MIL test environments is true?
- A. In the MILtest environment, stimulations and observations are possible anywhere via access points.
- B. In the MiL test environment, additional hardware is necessary to implement access points.
- C. In the MIL test environment, thetest object is available as compiled code and it is not readable by a human being.
- D. For a MIL test environment NO environmental model is necessary
Answer: A
NEW QUESTION 39
......
New CTFL-AuT Exam Dumps with High Passing Rate: https://www.prep4surereview.com/CTFL-AuT-latest-braindumps.html
CTFL-AuT Certification Exam Dumps with 42 Practice Test Questions: https://drive.google.com/open?id=1i_FH0p6T81UOYDc_nGGC_gwyXx55vj2U
