Prep4SureReview NSE7_SDW-6.4 Dumps Real Exam Questions Test Engine Dumps Training
Fortinet NSE7_SDW-6.4 exam dumps and online Test Engine
Fortinet NSE7_SDW-6.4 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
NEW QUESTION 10
Refer to the exhibit.
Which statement about the command route-tag in the SD-WAN rule is true?
- A. It enables the SD-WAN rule to load balance and assign traffic with a route tag
- B. It tags each route and references the tag in the routing table.
- C. It ensures route tags match the SD-WAN rule based on the rule order
- D. It uses route tags for a BGP community and assigns the SD-WAN rules with same tag.
Answer: C
NEW QUESTION 11
Which statement defines how a per-IP traffic shaper of 10 Mbps is applied to the entire network?
- A. Each IP is guaranteed a minimum 10 Mbps of bandwidth.
- B. FortiGate allocates each IP address a maximum 10 Mbps of bandwidth.
- C. A single user uses the allocated bandwidth divided by total number of users.
- D. The 10 Mbps bandwidth is shared equally among the IP addresses.
Answer: B
Explanation:
Explanation/Reference:
https://docs.fortinet.com/document/fortigate/6.2.0/cookbook/885253/per-ip-traffic-shaper
NEW QUESTION 12
Refer to the exhibit.
Which two statements about the status of the VPN tunnel are true? <Choose two )
- A. FortiGate created a single IPsec virtual interface that is shared by all clients
- B. There are separate virtual interfaces for each dial-up client
- C. 100.64.3.1 is one of the remote IP address that comes through index interlace 1.
- D. VPN static routes are prevented from populating the FortiGate routing table
Answer: B
NEW QUESTION 13
Refer to the exhibit.
Which statement about the trace evaluation by FomGate is true?
- A. Packets exceeding the configured concurrent connection limit are dropped based on the priority configuration.
- B. The packet exceeded the configured bandwidth and was dropped based on the priority configuration.
- C. The packet exceeded the configured maximum bandwidth and was dropped by the shared shaper.
- D. Packets exceeding the configured maximum concurrent connection limit are denied by the per-IP shaper.
Answer: D
NEW QUESTION 14
What is the lnkmtd process responsible for?
- A. Monitoring links for any bandwidth saturation
- B. Processing performance SLA probes
- C. Logging interface quality information
- D. Flushing route tags addresses
Answer: A
NEW QUESTION 15
Which components make up the secure SD-WAN solution?
- A. Application, antivirus, and URL, and SSL inspection
- B. Telephone, ISDN, and telecom network.
- C. FortiGate, FortiManager, FortiAnalyzer, and FortiDeploy
- D. Datacenter, branch offices, and public cloud
Answer: A
NEW QUESTION 16
Refer to the exhibit.
FortiGate has multiple dial-up VPN interfaces incoming on portl that match only FIRSTJVPN.
Which two configuration changes must be made to both IPsec
VPN interfaces to allow incoming connections to match all possible IPsec dial-up interfaces? (Choose two )
- A. Use different proposals are used between the interfaces.
- B. Configure a unique peer ID for each dial-up VPN interface
- C. Configure the IKE mode to be aggressive mode
- D. Use unique Diffie Hellman groups on each VPN interface
Answer: B,C
NEW QUESTION 17
Refer to the exhibit.
What must you configure to enable ADVPN?
- A. On the hub VPN, only the device needs additional phase one sett
- B. ADVPN should only be enabled on unmanaged FortiGate devices.
- C. Each VPN device has a unique pre-shared key configured separately on phase one
- D. The protected subnets should be set to address object to all (0.0 .0. o/o).
Answer: C
NEW QUESTION 18
Refer to exhibits.
Exhibit A.
Exhibit B.
Exhibit A shows the SD-WAN performance SLA and exhibit B shows the SO-WAN interface and the static routes configuration.
Port1 and port2 are member interfaces of the SD-WAN, and port2 becomes a dead member after reaching the failure thresholds Which statement about the dead member is correct?
- A. Dead members require manual administrator access to bring them back alive
- B. SD-WAN interface becomes disabled and port1 becomes the WAN interface
- C. Subnets 100 .64.1.0/23 and 172 . 20 . 0. 0/16 are reachable only through port1
- D. Port2 might become alive when a single response is received from an SLA server
Answer: C
NEW QUESTION 19
What are two roles that SD-WAN orchestrator plays when it works with FortiManager? (Choose two )
- A. It configures and monitors SD-WAN networks on FortiGate devices that are managed by FortiManager.
- B. It acts as an application that is released and signed by Fortinet to run as a part of management extensions on FortiManager
- C. It acts as a standalone device to assist FortiManager to manage SD-WAN interfaces on the managed FortiGate devices
- D. It acts as a hub FortiGate with an SD-WAN interface enabled and managed along with other FortiGate devices by FortiManager
Answer: A,D
NEW QUESTION 20
Refer to exhibits.
Exhibit A.
Exhibit B.
Exhibit A shows the traffic shaping policy and exhibit B show: the firewall policy FortiGate is not performing traffic shaping as expected basi on the policies shown in the exhibits.
To correct this traffic shaping issue on FortiGate, what configuration change must be made on which policy?
- A. The web filter profile must be enabled on the firewall policy
- B. The shaper mode must be applied per-IP shaper on the traffic shaping policy
- C. The URL category must be specified on the traffic shaping policy
- D. The application control profile must be enabled on the firewall policy.
Answer: A
NEW QUESTION 21
Refer to the exhibit.
Which two statements about the debug output are correct? (Choose two )
- A. The debug output shows per-lP shaper values and real-time readings.
- B. Traffic being controlled by the traffic shaper is under 1 Kbps
- C. FortiGate provides statistics and readings based on historical traffic logs.
- D. This traffic shaper drops traffic that exceeds the set limits.
Answer: A,C
NEW QUESTION 22
What would best describe the SD-WAN traffic shaping mode that bases itself on a percentage of available bandwidth?
- A. Reverse policy shaping mode
- B. Interface-based shaping mode
- C. Per-IP shaping mode
- D. Shared policy shaping mode
Answer: D
NEW QUESTION 23
What are the two minimum configuration requirements for an outgoing interface to be selected once the SD-WAN logical interface is enabled? (Choose two )
- A. Configure SD-WAN rules interface preference.
- B. Specify incoming interfaces in SD-WAN rules.
- C. Specify outgoing interface routing cost.
- D. Select SD-WAN balancing strategy.
Answer: A,C
NEW QUESTION 24
Which three parameters are available to configure SD-WAN rules? (Choose three.)
- A. Application signatures
- B. Type of physical link connection
- C. URL categories
- D. Source and destination IP address
- E. Internet service database (ISDB) address object
Answer: B,D,E
NEW QUESTION 25
......
Fortinet NSE7_SDW-6.4: Selling NSE 7 Network Security Architect Products and Solutions: https://www.prep4surereview.com/NSE7_SDW-6.4-latest-braindumps.html
Reliable NSE7_SDW-6.4 Exam Tips Test Pdf Exam Material: https://drive.google.com/open?id=1Q3flhcRx3ZzlUMoUAXyVkW2-9Cl22kyG
