HPE6-A66 Certification Exam Dumps Questions in here [Jan-2024]
Updated HPE6-A66 Exam Practice Test Questions
NEW QUESTION # 22
A network architect is given the task to design a new network solution for NewStellar Company, Inc. NewSteiiar has a main corporate campus in a business park with two adjacent buildings. The network architect has given one floor to analyze, Building 1 Floor 2, shown in the attached exhibit.
Each building has three floors and each floor is 322 x 175 feet (98 x 53 meters) for 56,350 square feet (5,235 square meters) total, which results in a total of 338,100 feet (31,410 square meters) for the entire building space. Each floor has a central main corridor with washrooms, stairs, elevators and supply and network cabinets. There are cubicles around the perimeter of the floor. The central part main corridor's dimensions contain 9,350 square feet {870 square meters).
Because of security concerns, video cameras will be installed throughout the facility. There are 16 of these per floor, 8 per wiring closet. The cameras are non-WiFi capable and require POE 802.3af-capable switch ports from which to draw power.
A wireless capacity design is required. Assuming that wireless coverage is required across the Building 1, Floor 2, including the central area, and that half the required APs will connect to each wiring closet, approximately how many POE+ ports will be required per wiring closet for all devices that have POE or POE+ needs?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION # 23
A network architect is redesigning a wireless network. The architect begins by analyzing the number of spatial streams supported by APs of various vendors as well as the wireless devices currently in the network, if the company wants to ensure that new wireless design, including user wireless devices, support Multi-User MIMO (MU-MIMO). which standard or standards must the wireless products support?
- A. Only 802.11ax
- B. Only 802.11ax,802.1lac, and 802.l1n
- C. Only 802.11ax,802.11ac, 802.11n, and 802.11a
- D. Only 802.11ax and 8011.ac
Answer: B
NEW QUESTION # 24
A company needs to replace an existing legacy wireless and wired solution with one that supports features like 802 11 ax for APs and logical switching for switches. The company is located on a single floor with two wiring closets. Assume that there will be 10 APs connected via POE+ to each wiring closet, along with 36 wired user connections All switches on a floor should be configured in a single stack. The distance between wiring closets is 100 feet (31 meters).
Which switching solution will minimally provide 10 Gbps uplinks at the most cost-effective price, while still meeting the company's requirements?
- A. 5406R switches
- B. 2930F switches
- C. 3810M switches
- D. 2930M switches
Answer: D
NEW QUESTION # 25
A customer requires Aruba switches that support Smart Rate ports to connect to Aruba APs Which switching product should the customer purchase that will provide 24 Smart Rate ports per access layer switch'?
- A. Aruba 2540
- B. Aruba 2930F
- C. Aruba 2930M
- D. OfficeConnect 1950
Answer: C
NEW QUESTION # 26
A network architect is designing a wireless solution for a company that is leasing one floor in a multi-floor building in a downtown area. The customer is concerned about ensuring complete Wi-Fi coverage and pin-pointing RF hazards. What type of survey should the network architect perform?
- A. Virtual
- B. Active
- C. Passive
- D. Spectrum clearing
Answer: B
NEW QUESTION # 27
A university department has a program in video processing and editing. Students in the department use Wi-Fi to interact with the video servers. The editing and processing is done by the students accessing and using the video servers. However, the students must then stream their results, via Wi-Fi to their laptops to verify the results. A network architect has determined that no more than 20 APs will be needed for the Wi-Fi solution. Because of the large amount of bandwidth used during the streaming, the Aruba mobility controller solution will need to support 10 Gbps links.
Which solution would cost-effectively meet this customer's requirements?
- A. 0
- B. 7240XM
- C. 1
- D. 2
Answer: C
NEW QUESTION # 28
A wiring closet with a POE+ switch is 250 feet (76 meters) away from an AP on a building floor. The AP's smart-rate port is connected to a smart-rate port on the switch, which is capable of 10 Gbps. The cable type is Cat5e STP. What is the maximum speed that the customer can expect from the connected AP?
- A. 5 Gbps
- B. 1 Gbps
- C. 10 Gbps
- D. 2.5 Gbps
Answer: D
NEW QUESTION # 29
NewRocket requires a wireless capacity design 30 Aruba 510 APs will be connected to each wiring closet using SmartRate connections. Wireless coverage needs to be provided even if a POE+ switch loses power Because of security concerns, wired video cameras were recently installed throughout the facility. There are 12 of these per floor. 6 per wiring closet. The cameras are 802.11n WiFi capable and have power injectors from which to draw power.
Based on the POE+ needs of the mentioned devices, which solution would meet the POE+ requirements while still providing a redundant and cost-effective Wi-Fi solution for the devices that require POE+ for Building 1, Floor 2?
- A. One 3810M 40G 8 HPE Smart Rate switch
- B. Two 2930F 24-port POE+ switches
- C. Two 2930M 24-port POE+ switches
- D. One 2930M 48-port POE+ switch
Answer: D
NEW QUESTION # 30
A company has two buildings on a campus that are approximately 700 feet (214 meters) apart with a clear line of site. No fiber exists between the buildings; however, there is a need for connecting the networks in the buildings together. The connection between the two buildings will need to support peak rates over 1 Gbps.
Which solution should the company choose that will meet their requirements as well as being cost-effective?
- A. Two outdoor AP 367s
- B. Two outdoor AP 387s
- C. Multi-mode fiber between campus switches
- D. Two outdoor AP 510s
Answer: A
NEW QUESTION # 31
A network designer is documenting the number of physical sites for a customer that is within the scope of a redesign project. When determining the network purpose at each site, on what should the designer focus at each site? (Select two.)
- A. number of buildings
- B. square footage
- C. ceiling height
- D. number of users
- E. types of users and their devices
Answer: B,C
NEW QUESTION # 32
A network architect has created two sites in IRIS and defined network devices for each site. From which window would a network architect connect the two sites together?
- A. Topology
- B. Catalog
- C. Start Page
- D. Site-1
Answer: D
NEW QUESTION # 33
A network architect plans to use two ArubaOS 5406 switches in a wiring closet configured in a VSF domain The VSF link requires a 40 GDps connection Which SFP+ transceiver solutions would meet this requirement?
- A. QSFP28
- B. SmartRate
- C. QSFP+ LC
- D. SFP
Answer: B
NEW QUESTION # 34
A network architect plans to implement channel bonding in a new wireless design that involves dense deployment of APs. Which channel width would be optimal for this design?
- A. 10MHZ
- B. 40 MHZ
- C. 20 MHz
- D. 60 MHZ
Answer: D
NEW QUESTION # 35
A network architect is designing a Wi-Fi solution for a customer using Aruba Central's VisualRF tool When creating a Campus view, how would the network architect pull in a map that displayed the campus location in a city?
- A. Use VisualRF's built-in map tool and define the appropriate longitude and latitude information
- B. Import the longitude and latitude information from any web-based map site
- C. Create a screen capture from any web-based map site and import the picture file
- D. Import the longitude and latitude information from Google Maps
Answer: B
NEW QUESTION # 36
A customer is purchasing Aruba 555 APs for a new wireless network. The APs will be pre-staged as campus APs (CAPs) and be managed by a controller solution During the pre-staging process, console access to the APs might be necessary Which console connection cable should the customer purchase for the 555 APs?
- A. RJ-45
- B. RS-232
- C. USB-A
- D. Micro-B USB
Answer: D
NEW QUESTION # 37
A company has chosen an Aruba mobility controller solution for the redesign of their wireless network The design will have two 7205 controllers in a cluster for campus employees and a single VMC-50 virtual controller for remote access via a DMZ. A Mobility Master (MM) is used for centralized license and controller management. All controllers will minimally run ArubaOS 8 4 or later Currently the company has 1.000 employees. There are 30 branch offices that will use RAPs to connect to the DMZ controller. A peak of 100 users concurrently using the VIA client will also connect to the DMZ controller.
How many Aruba LIC-VIA licenses does the company need to purchase for this solution?
- A. 0
- B. 1
- C. 2
- D. 1,030
Answer: D
NEW QUESTION # 38
A network architect needs to design a new wireless solution for a small company The architect estimates that about 150 APs will be required to implement a capacity design. Roaming support is required. Also, the design requires meshing to connect some of the APs to the network.
The customer requires that client state synchronization be provided for real-time failover.
Which solution would most cost-effectively meet these requirements?
- A. Two 7030 mobility controller and campus APs in a cluster
- B. Two 7205 mobility controller and campus APs in a cluster
- C. lAPs in a cluster
- D. FRAPs in a cluster
Answer: D
NEW QUESTION # 39
......
Verified HPE6-A66 dumps Q&As 100% Pass in First Attempt Guaranteed Updated Dump: https://drive.google.com/open?id=1o84I7nYymNPxmUAYHtLCn-IR6GoNgK_d
Pass HP Certification HPE6-A66 Exam With 60 Questions: https://www.prep4surereview.com/HPE6-A66-latest-braindumps.html
