Mistakes are the best teachers — if you review them. The 300-510 software version from Prep4SureReview remembers your errors after each session and prompts you to practice them repeatedly, turning weak Cisco Implementing Cisco Service Provider Advanced Routing Solutions points into strong ones.
Cisco 300-510 Exam Overview:
| Certification Vendor: | Cisco |
|---|---|
| Exam Name: | Implementing Cisco Service Provider Advanced Routing Solutions |
| Exam Number: | 300-510 SPRI |
| Exam Format: | Multiple-Choice, Testlet, Drag-and-Drop, Simulation |
| Real Exam Qty: | 60-70 |
| Exam Price: | $300 USD |
| Exam Duration: | 90 minutes |
| Available Languages: | English |
| Certificate Validity Period: | 3 years |
| Related Certifications: | Cisco Certified Network Professional (CCNP) Service Provider Cisco Certified Specialist - Service Provider Advanced Routing Implementation |
| Passing Score: | Approx. 825/1000 (Cisco does not publish exact passing score) |
| Sample Questions: |  |
| Exam Way: | Pearson VUE (Online or Test Center) |
| Pre Condition: | No formal prerequisites, but CCNA/CCNP level knowledge of core SP technologies is recommended. |
| Official Syllabus URL: | https://www.cisco.com/site/us/en/learn/training-certifications/exams/spri.html |
Cisco 300-510 Exam Syllabus Topics:
| Section | Weight | Objectives |
|---|---|---|
| Routing Policy and Manipulation | 20% | - Implement and troubleshoot redistribution - Troubleshoot route maps and routing policy language - Implement and troubleshoot route filtering
|
| Multicast Routing | 15% | - Describe multicast concepts (IGMPv3, MLD, PIM) - Identify and resolve multicast routing issues
|
| MPLS and Segment Routing | 30% | - Describe CGNAT (NAT44, NAT64, MAP-T) - Implement and troubleshoot Segment Routing (SR-MPLS and SRv6)
|
| Unicast Routing | 35% | - Compare OSPF and IS-IS routing protocols - Troubleshoot OSPF multiarea operations (IPv4 and IPv6) - Troubleshoot BGP (eBGP and iBGP)
|
Your Cisco Implementing Cisco Service Provider Advanced Routing Solutions Questions, Fully Answered
Cisco lists the following prerequisites for the Cisco Implementing Cisco Service Provider Advanced Routing Solutions: No formal prerequisites, but CCNA/CCNP level knowledge of core SP technologies is recommended..
Verify the current requirements on the official certification page before registering.
The Cisco Implementing Cisco Service Provider Advanced Routing Solutions blueprint is organized around these main domains:
- Unicast Routing (35%)
- Routing Policy and Manipulation (20%)
- Multicast Routing (15%)
Additional domains follow in the official outline; our bank covers the complete set.
Per the latest exam information, the 300-510 exam contains 60-70 questions and allows 90 minutes minutes. The software and online engines let you rehearse under those exact conditions.
Clear and confirmed. If you fail the corresponding exam within 60 days of purchase, send your failure score report to our support email together with a scanned copy of your enrollment slip — the official Score Report PDF must reach us within two days of the exam date. Once confirmed, we process the full refund within seven days. Exclusions: exams taken within three days of purchase, candidate names that differ from the payer, and free or expired products. Alternatively, exchange your product for two others of equal value at no cost.
Upon successful payment, our system automatically emails the product to your mailbox — typically within about a minute — with an instant download link on screen. If nothing arrives within two hours, check your spam folder and contact us. From the date of purchase you hold a 365-day service warranty: our IT colleagues check update information every day, and whenever the bank is revised, we send you the download email for reference. Renew beyond the year at a 50% discount.
Currently, the 300-510 exam requires a passing score of Approx. 825/1000 (Cisco does not publish exact passing score), and the registration fee is $300 USD. Both figures belong to Cisco and can change, so confirm them on the official site when you book.
Match the tool to your habits. The PDF version suits paper lovers: read online or print out for handwritten practice. The software version suits Windows users: interactive and functional, it reminds you of good study methods and easy memorization — and it remembers your mistakes after each session, prompting repeated practice until they stick. The online version carries the same functions to every operating system and device, so you can read, write, and recite anytime, anywhere. Whichever you choose, every answer is expert-verified, customer service is online 24/7, your information stays secret under a strict protection system — no advertisement emails — and returning customers enjoy loyalty discounts.
Cisco Implementing Cisco Service Provider Advanced Routing Solutions Sample Questions:
SIMULATION
Guidelines
This is a lab item in which tasks will be performed on virtual devices.
- Refer to the Tasks tab to view the tasks for this lab item.
- Refer to the Topology tab to access the device console(s) and perform the tasks.
- Console access is available for all required devices by clicking the device icon or using the tab(s) above the console window.
- All necessary preconfigurations have been applied.
- Do not change the enable password or hostname for any device.
- Save your configurations to NVRAM before moving to the next item.
- Click Next at the bottom of the screen to submit this lab and move to the next question.
- When Next is clicked, the lab closes and cannot be reopened.
Topology
Tasks
Star Technology has decided to establish connectivity with an ISP for accessing the Internet. In phase 1, the approach is to establish a dual-homed connection from HQ-R1 to ISP-R1 and ISP- R2. This will provide some degree of redundancy in the connectivity between HQ-R1 and ISP routers.
Based on network design, an autonomous system of Star Technology is 1, and AS of ISP is 2. A network Implementation Engineer has already initiated the configuration; trouble-shooting is required to find out and complete missing configurations. Moreover, configuration is to be established in a way that links between HQ-R1 and ISP-R1 can be used as the preferred path for reaching AS 2.
Below are tasks to be achieved to include the missing commands and complete the troubleshooting Task 1:
On HQ-R1, configure BGP for Autonomous System 1. Establish EBGP relationship with ISP-R1 and ISP-R2.
Notes:
After performing troubleshooting at HQ-R1, the following outcome should appear.
%BGP-5-ADJCHANGE: neighbor 192.168.12.2 Up
%BGP-5-ADJCHANGE: neighbor 192.168.13.2 Up
Task 2:
On HQ-R1, Advertise LBO interface as a prefix in BGR
Task 3:
On HQ-R1, configure the route map with the name loc. Set the local preference attribute as 900.
Task 4:
On HQ-R1, define the path between HQ-R1 - ISP-R1 as the preferred path for reaching AS 2.
Route map configured in task 3 to be used in the inbound direction.
Correct Answer:
Task 1: Configure BGP for AS 1 and Establish EBGP Peering with ISP-R1 and ISP-R2 To establish an EBGP relationship between HQ-R1 and ISP-R1/ISP-R2 on HQ-R1:
router bgp 1
neighbor 192.168.12.2 remote-as 2
neighbor 192.168.13.2 remote-as 2
router bgp 1: Enables BGP for AS 1 on HQ-R1.
neighbor <IP> remote-as 2: Establishes an EBGP session with the neighbors ISP-R1 (192.168.12.2) and ISP-R2 (192.168.13.2).
Task 2: Advertise Loopback0 Interface Prefix in BGP
To advertise the loopback interface (e.g., Loopback0) into BGP on HQ-R1:
router bgp 1
network <L0 IP> mask <L0 Subnet>
Example (assuming Loopback0 IP is 192.168.10.1/24):
router bgp 1
network 192.168.10.0 mask 255.255.255.0
The networkcommand specifies which prefix (L0) to advertise into BGP.
Task 3: Configure a Route Map Named locto Set Local Preference to 900
To set the local preference attribute to 900 using a route map on HQ-R1:
route-map loc permit 10
set local-preference 900
route-map loc permit 10: Creates a route map named loc.
set local-preference 900: Sets the local preference to 900, which influences route selection.
Task 4: Prefer the Path via ISP-R1 for Reaching AS 2
To prefer the link between HQ-R1 and ISP-R1 as the preferred path on HQ-R1:
router bgp 1
neighbor 192.168.12.2 route-map loc in
neighbor 192.168.12.2 route-map loc in: Applies the locroute map inbound on the session with ISP-R1 (192.168.12.2).
This sets the local preference to 900 for routes received from ISP-R1, making it the preferred path.
Verification Commands
Verify BGP Neighbors: show ip bgp summary
Expected output: Neighbors 192.168.12.2and 192.168.13.2should be Up.
Verify Advertised Routes: show ip bgp
Confirm the Loopback0 prefix is advertised.
Verify Local Preference: show ip bgp neighbors 192.168.12.2 received-routes
Check that the local preference is 900 for routes from ISP-R1.
Complete Configuration Summary on HQ-R1:
router bgp 1
neighbor 192.168.12.2 remote-as 2
neighbor 192.168.13.2 remote-as 2
network 192.168.10.0 mask 255.255.255.0
neighbor 192.168.12.2 route-map loc in
route-map loc permit 10
set local-preference 900
The local preference value of 900 ensures that routes from ISP-R1 are preferred over ISP-R2.
The Loopback0 prefix is successfully advertised into BGP.
The BGP sessions to ISP-R1 and ISP-R2 are established as required.
Which attribute is used to instruct the router that packets must be processed by an ASA that is associated with the segment?
- A. node SID that identifies a specific network device
- B. adjacency SID with unidirectional adjacency instructions
- C. prefix SID that represents a specific route prefix
- D. service SID with service instructions
Correct Answer: D 🗳️
Explanation: Only visible for Prep4SureReview members. You can sign-up / login (it's free).
Refer to the exhibit. Routers R2, R3, R4 and R5 all reside in the same area, with R1 in a different area R3 is overutilized and the engineer wants to reduce its CPU load. The engineer configured router R4 to summarize routes that it receives from R5, but R3 is still receiving all of the R5 routes. Which action resolves the issue?
- A. Configure R2 as a Level 1 router
- B. Configure the summary routes on R5.
- C. Configure R3 in a new area,
- D. Configure R4 as a Level I-Level 2 router
Correct Answer: C 🗳️
Refer to the exhibit. Which attribute can router 1 alter so that only other iBGP peers prefer to use
192.168.4.2 as the next hop for route 192.168.3.0/24?
- A. local preference
- B. origin
- C. MED
- D. weight
Correct Answer: A 🗳️
Explanation: Only visible for Prep4SureReview members. You can sign-up / login (it's free).
Refer to the exhibit. MPLS traffic from 192.168.4.0/24 to 192.168.5.0/24 is failing to pass over the link from R4 to R2. The engineer verified that:
- Cisco Express Forwarding is enabled on all routers.
- All routers reach all networks via OSPF.
- MPLS traffic from 192.168.1.0/24 to 192.168.3.0/24 is passing
normally over the link from R1 to R2.
Which action resolves the issue?
- A. On router R4, remove the mpls ip command on the s/0/0/2 interface.
- B. On router R4, configure the mpls label protocol Idp command on all serial interfaces.
- C. On router R2, configure the mpls ip command on the s0/0/4 interface.
- D. On router R2, configure the mpls label protocol Idp command on the interface.
Correct Answer: C 🗳️
Diana 
Noel 
Gordon 
Curitis 
Myra 
Chapman 
Jonathan 
Eden 
Vic 
Rock 
Noah 
Rose 
Julian 
Cathy 
Harlan 
Griselda 
Troy 
