Free 350-401 Braindumps Download Updated on May 30, 2023 with 745 Questions
Cisco 350-401 Exam Practice Test Questions
Read about the salaries of the Cisco 350-401 Exam certified below:
- England: 82930 Pound
- India: 712503 INR
- Europe: 97902 Euro
- United States: 107,786 USD
What Are the Details of the Cisco ENCOR 300-401 Certification Exam?
Even though the vendor doesn't give details on the total number of questions that the test includes, there is still some information disclosed. Thus, candidates should be ready to solve questions of multiple formats such as drag and drop, scenario-based, multiple-choice, or multiple-answer items. One will need to answer correctly about 80 to 85% of the total exam questions in 120 minutes.
ENCOR test is available in Japanese and English. The registration fee is of $300. When it comes to the enrollment process, candidates will have to follow four simple steps. They will first need to create an account on the Pearson VUE platform and log in. The next step would be to go to the “proctored exam” section. The third action involves searching for the test's code which is 350-401. Finally, they will need to follow the instructions that appear on the screen and finalize the registration.
NEW QUESTION # 205
Refer to the exhibit.
Only administrators from the subnet 10.10.10.0/24 are permitted to have access to the router. A secure protocol must be used for the remote access and management of the router instead of clear-text protocols.
Which configuration achieves this goal?
- A. Option D
- B. Option C
- C. Option A
- D. Option B
Answer: D
NEW QUESTION # 206
Refer to the exhibit. What does the error message relay to the administrator who is trying to configure a Cisco IOS device?
- A. A NETCONF message with valid content based on the YANG data models was made, but the request failed.
- B. The NETCONF running datastore is currently locked.
- C. The device received a valid NETCONF request and serviced it without error.
- D. A NETCONF request was made for a data model that does not exist.
Answer: D
Explanation:
NEW QUESTION # 207
Refer to the exhibit. What is the effect of this configuration?
- A. When users attempt to connect to vty lines 0 through 4, the device will authenticate them against TACACS+ if local authentication fails
- B. The device will allow users at 192.168.0.202 to connect to vty lines 0 through 4 using the password ciscotestkey
- C. The device will allow only users at 192.166.0.202 to connect to vty lines 0 through 4
- D. The device will authenticate all users connecting to vty lines 0 through 4 against TACACS+
Answer: D
NEW QUESTION # 208
What is the centralized control policy in a Cisco SD-WAN deployment?
- A. list of ordered statements that define user access policies
- B. set of statements that defines how routing is performed
- C. list of enabled services for all nodes within the cloud
- D. set of rules that governs nodes authentication within the cloud
Answer: B
NEW QUESTION # 209
Which outbound access list, applied to the WAN interface of a router, permits all traffic except for http traffic sourced from the workstation with IP address 10.10.10.1?
A)
B)
C)
D)
- A. Option D
- B. Option A
- C. Option C
- D. Option B
Answer: B
NEW QUESTION # 210
Refer to the exhibit.
Which two commands ensure that DSW1 becomes root bridge for VLAN 10 and 20?
- A. spanning-tree mst 1 priority 4096
- B. spanning-tree mstp vlan 10,20 root primary
- C. spanning-tree mst 1 root primary
- D. spanning-tree mst 1 priority 1
- E. spanning-tree mst vlan 10,20 priority root
Answer: A,C
NEW QUESTION # 211
Drag and drop the characteristics from the left onto the orchestration tools they describe on the right.
Answer:
Explanation:
NEW QUESTION # 212
What is the function of the fabric control plane node In a Cisco SD-Access deployment?
- A. It provides Integration with legacy nonfabric-enabled environments.
- B. It performs traffic encapsulation and security profiles enforcement in the fabric.
- C. It is responsible for policy application and network segmentation in the fabric.
- D. It holds a comprehensive database that tracks endpoints and networks in the fabric.
Answer: D
Explanation:
Explanation
Fabric control plane node (C): One or more network elements that implement the LISP Map-Server (MS) and Map-Resolver (MR) functionality. The control plane node's host tracking database keep track of all endpoints in a fabric site and associates the endpoints to fabric nodes in what is known as an EID-to-RLOC binding in LISP.
Reference:
https://www.cisco.com/c/en/us/td/docs/solutions/CVD/Campus/cisco-sda-macro-segmentation-deploy-guide.htm
NEW QUESTION # 213
Drag and drop the characteristics from the left onto the orchestration tool classifications on the right.
Answer:
Explanation:
NEW QUESTION # 214
Refer to the exhibit.
Which LISP component do routers in the public IP network use to
forward traffic between the two networks?
- A. EID
- B. map resolver
- C. map server
- D. RLOC
Answer: D
Explanation:
Explanation
Locator ID Separation Protocol (LISP) is a network architecture and protocol that implements the use of two namespaces instead of a single IP address:
+ Endpoint identifiers (EIDs) - assigned to end hosts.
+ Routing locators (RLOCs) - assigned to devices (primarily routers) that make up the global routing system.
Reference: https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/iproute_lisp/configuration/xe-
3s/irl-xe-3s-book/irl-overview.html
NEW QUESTION # 215
Where is radio resource management performed in a cisco SD-access wireless solution?
- A. DNA Center
- B. wireless controller
- C. control plane node
- D. Cisco CMX
Answer: B
Explanation:
Explanation
Fabric wireless controllers manage and control the fabric-mode APs using the same general model as the traditional local-mode controllers which offers the same operational advantages such as mobility control and radio resource management. A significant difference is that client traffic from wireless endpoints is not tunnelled from the APs to the wireless controller. Instead, communication from wireless clients is encapsulated in VXLAN by the fabric APs which build a tunnel to their first-hop fabric edge node. Wireless traffic it tunneled to the edge nodes as the edge nodes provide fabric services such as the Layer 3 Anycast Gateway, policy, and traffic enforcement.
https://www.cisco.com/c/en/us/td/docs/solutions/CVD/Campus/cisco-sda-design-guide.html
NEW QUESTION # 216
Drag and drop the descriptions from the left onto the routing protocol they describe on the right.
Answer:
Explanation:
NEW QUESTION # 217
A network engineer configures BGP between R1 and R2. Both routers use BGP peer group CORP and are set up to use MD5 authentication. This message is logged to the console of router R1:
Which two configuration allow peering session to from between R1 and R2? Choose two.)
- A. R2(config-router)#neighbor 10.10.10.1 peer-group CORP R2(config-router)#neighbor CORP password Cisco
- B. R1(config-router)#neighbor 10.10.10.1 peer-group CORP R1(config-router)#neighbor CORP password Cisco
- C. R2(config-router)#neighbor 10.10.10.1 peer-group CORP R2(config-router)#neighbor PEER password Cisco
- D. R2(config-router)#neighbor 10.120.10.1 peer-group CORP R2(config-router)#neighbor CORP password Cisco
- E. R1(config-router)#neighbor 10.120.10.1 peer-group CORP R1(config-router)#neighbor CORP password Cisco
Answer: B,D
NEW QUESTION # 218
Refer to the exhibit.
Which password allows access to line con 0 for a username of "tommy" under normal operation?
- A. local
- B. Cisco
- C. Tommy
- D. 0 Cisco
Answer: B
Explanation:
https://www.cisco.com/c/en/us/support/docs/security-vpn/terminal-access-controller-access-control-system-tacacs-/200606-aaa-authentication-login-default-local.html In this question, there are two different passwords for user "tommy": + In the TACACS+ server, the password is "Tommy" + In the local database of the router, the password is "Cisco".
From the line "login authentication local" we know that the router uses the local database for authentication so the password should be "Cisco".
Note: "... password 0 ..." here means unencrypted password.
NEW QUESTION # 219
Refer to the exhibit.
What is the result when a technician adds the monitor session 1 destination remote vlan 233 command?
- A. RSPAN traffic is split between VLANs 222 and 223.
- B. An error is flagged for configuring two destinations.
- C. The RSPAN VLAN is replaced by VLAN 223.
- D. RSPAN traffic is sent to VLANs 222 and 223.
Answer: C
NEW QUESTION # 220
Refer to the exhibit.
An engineer must create a script that appends the output of the show process cpu sorted command to a file. Which action completes the configuration?
- A. action 4.0 publish-event "show process cpu sorted | append flash:high-cpu-file"
- B. action 4.0 cli command "show process cpu sorted | append flash:high-cpu-file"
- C. action 4.0 ens-event "show process cpu sorted | append flash:high-cpu-file"
- D. action 4.0 syslog command "show process cpu sorted | append flash:high-cpu-file"
Answer: B
NEW QUESTION # 221
What is the fabric control plane node In a Cisco SD-Access deployment?
- A. It provides Integration with legacy nonfabric-enabled environments.
- B. It performs traffic encapsulation and security profiles enforcement in the fabric.
- C. It is responsible for policy application and network segmentation in the fabric.
- D. It holds a comprehensive database that tracks endpoints and networks in the fabric.
Answer: D
Explanation:
Explanation
Fabric control plane node (C): One or more network elements that implement the LISP Map-Server (MS) and Map-Resolver (MR) functionality. The control plane node's host tracking database keep track of all endpoints in a fabric site and associates the endpoints to fabric nodes in what is known as an EID-to-RLOC binding in LISP.
NEW QUESTION # 222
Based on the router's API output In JSON format below, which Python code will display the value of the 'role' key?
- A. Option D
- B. Option C
- C. Option A
- D. Option B
Answer: B
NEW QUESTION # 223
Refer to the exhibit.
Which privilege level is assigned to VTY users?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
Explanation:
Explanation
Lines (CON, AUX, VTY) default to level 1 privileges.
NEW QUESTION # 224
Drag and drop the characteristics from the left onto the correct routing protocol types on the right.
Answer:
Explanation:
Explanation:
OSPF: SEGMENT, LINK STATE, TABLES
EIGRP: UNEQUAL PATH, DISTANCE VECTOR, METRIC
NEW QUESTION # 225
An engineer creates the configuration below. Drag and drop the authentication methods from the left into the order of priority on the right. Not all options are used.
Answer:
Explanation:
Explanation
NEW QUESTION # 226
Refer to me exhibit.
Refer to the exhibit. An engineer attempts to create a configuration to allow the Blue VRF to leak into the global routing table, but the configuration does not function as expected. Which action resolves this issue?
- A. Change the access-list number in the route map
- B. Change the access-list destination mask to a wildcard.
- C. Change the source network that Is specified in access-list 101.
- D. Change the route-map configuration to VRF_BLUE.
Answer: B
NEW QUESTION # 227
Drag and drop the snippets onto the blanks within the code to construct a script that configures BGP according to the topology. Not all options are used, and some options may be used twice.
Answer:
Explanation:
NEW QUESTION # 228
Which technology is used to provide Layer 2 and Layer 3 logical networks in the Cisco SD-Access architecture?
- A. underlay network
- B. overlay network
- C. VPN routing/forwarding
- D. easy virtual network
Answer: B
Explanation:
NEW QUESTION # 229
Which action is a function of VTEP in VXLAN?
- A. encapsulating and de-encapsulating VXLAN Ethernet frames
- B. tunneling traffic from IPv6 to IPv4 VXLANs
- C. allowing encrypted communication on the local VXLAN Ethernet segment
- D. tunneling traffic from IPv4 to IPv6 VXLANs
Answer: A
NEW QUESTION # 230
......
Updated Verified 350-401 dumps Q&As - Pass Guarantee or Full Refund: https://www.prep4surereview.com/350-401-latest-braindumps.html
Updated Certification Exam 350-401 Dumps - Practice Test Questions: https://drive.google.com/open?id=1z-M-PpwsxBoQVylIQqSCGXEf9nPINxbp
