Latest [Jan 09, 2022] Cisco 350-401 Exam Practice Test To Gain Brilliante Result
Take a Leap Forward in Your Career by Earning Cisco 350-401
Understanding functional and technical aspects of Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Security
The following will be discussed in CISCO 350-401 dumps:
- Configure and verify device monitoring using syslog for remote logging
- Understanding Enterprise Network Security Architecture
- Troubleshooting Wireless Client Connectivity
- Building Redundant Switched Topology
- Configure and verify NetFlow and Flexible NetFlow
- Introducing QoS
- Understanding EIGRP
- Understanding Wireless Client Authentication
- Diagnose network problems using tools such as debugs, conditional debugs, trace route, ping, SNMP, and syslog
- Configure and verify NETCONF and RESTCONF
- Implementing Layer 2 Port Aggregation
- Describe Cisco DNA Center workflows to apply network configuration, monitoring, and management
- Introducing APIs in Cisco DNA Center and vManage
- Implementing Network Services
- Examining Wireless AP Operation
- Implementing Network Redundancy
- Introducing Virtualization Protocols and Techniques
- Configure and verify IPSLA
- Understanding the Basics of Python Programming
- Using Network Analysis Tools
- Implementing Campus LAN Connectivity
- Exploring Automation and Assurance Using Cisco DNA Center
- Introducing Network Programmability Protocols
- Understanding Virtual Private Networks and Interfaces
- Exploring EBGP
- Examining Wireless Deployment Options
- Configure and verify SPAN/RSPAN/ERSPAN
- Examining the Cisco SD-Access Solution
- Examining Cisco Enterprise Network Architecture
- Understanding Wireless Principles
- Understanding Cisco Switching Paths
- Introducing Multicast Protocols
- Implementing Secure Access Control
- Understanding Wireless Roaming and Location Services
- Implementing OSPF
- Implementing NAT
- Optimizing OSPF
- Implementing Infrastructure Security
- Understanding the Working Principles of the Cisco SD-WAN Solution
Exam topics
You should know that Cisco 350-401 covers six different topics and each has its specific components. The percentage associated with each of them informs the weight that each objective has in the questions. This means that the sections with the higher percentages will likely have more questions than those with lower figures. The domains covered in this test are highlighted below:
- Infrastructure: 30%;
- Architecture: 15%;
- Security: 20%;
- Virtualization: 10%;
- Network Assurance: 10%.
- Automation: 15%;
Let’s look at these 6 topic areas that are covered in the 350-401 certification exam and explore their special aspects in detail.
Understanding functional and technical aspects of Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Automation
The following will be discussed in CISCO 350-401 dumps pdf:
- PSK
- Next-generation firewall
- Lines and password protection
- Network access control with 802.1X, MAB, and WebAuth
- EAP
- Define the components and features of Cisco SD-WAN solutions, including the orchestration plane, management plane, control plane, and data plane
- Endpoint security
- Configure and verify device access control
- Describe the concepts and features of Quality of Service (QoS), and describe the need within the enterprise network
- WebAuth
- Describe REST API security
- Authentication and authorization using AAA
- CoPP
- Describe the concepts, purpose, and features of multicast protocols, including Internet Group Management Protocol (IGMP) v2/v3, Protocol-Independent Multicast (PIM) dense mode/sparse mode, and rendezvous points
- Describe the components and features of the Cisco SD-Access solution, including the nodes, fabric control plane, and data plane, while illustrating the purpose and function of the Virtual Extensible LAN (VXLAN) gateways
- Threat defense
- Describe network programmability protocols such as Network Configuration Protocol (NETCONF) and RESTCONF
- Configure and verify wireless security features
- Describe APIs in Cisco DNA Center and vManage
- TrustSec, MACsec
- ACLs
- Explain basic Python components and conditionals with script writing and analysis
- Configure and verify infrastructure security features
- Describe the components of network security design
NEW QUESTION 94
Refer to the exhibit.
After running the code in the exhibit. Which step reduces the amount of data that NETCONF server returns to the NETCONF client, to only the interface's configuration?
- A. Create an XML filter as a string and pass it to get_config() method as an argument
- B. Use the JSON library to parse the data returned by the NETCONF server for the interface's configuration
- C. Create a JSON filter as a string and pass it to the get_config() method as an argument
- D. Use the txml library to parse the data returned by the NETCONF server for the interface's configuration
Answer: A
NEW QUESTION 95
What does the Cisco DMA REST response Indicate?
- A. Cisco DNA Center has the Incorrect credentials for RouterASR-1
- B. Cisco DONA Center has the incorrect credentials for cat3000-1
- C. Cisco DNA Center Is unable to communicate with cat9000-1
- D. Cisco DNA Center has the incorrect credentials for cat3850-1
Answer: B
NEW QUESTION 96
Drag and drop the characteristics from the left onto the correct infrastructure deployment types on the right.
Answer:
Explanation:
Explanation
On premise: customizable,specific requirements,resources
Cloud: scale, built-in automated backup, strong stable internet
NEW QUESTION 97 
Refer to the exhibit. An engineer is using XML in an application to send information to a RESTCONF-enabled device. After sending the request, the engineer gets this response message and a HTTP response code of 400. What do these responses tell the engineer?
- A. The Content-Type header sent was application/xml.
- B. JSON body was used
- C. POST was used instead of PUT to update
- D. The Accept header sent was application/xml
Answer: A
Explanation:
NEW QUESTION 98
Refer to the exhibit.
An engineer must ensure that all traffic leaving AS 200 will choose Link 2 as the exit point. Assuming that all BGP neighbor relationships have been formed and that the attributes have not been changed on any of the routers, which configuration accomplish task?
- A. R3(config-router)neighbor 10.1.1.1 weight 200
- B. R3(config-router)bgp default local-preference 200
- C. R4(config-router)bgp default local-preference 200
- D. R4(config-router)nighbor 10.2.2.2 weight 200
Answer: C
Explanation:
Explanation
Local preference is an indication to the AS about which path has preference to exit the AS in order to reach a certain network. A path with a higher local preference is preferred. The default value for local preference is 100.
Unlike the weight attribute, which is only relevant to the local router, local preference is an attribute that routers exchange in the same AS. The local preference is set with the "bgp default local-preference In this case, both R3 & R4 have exit links but R4 has higher local-preference so R4 will be chosen as the preferred exit point from AS 200.
NEW QUESTION 99
Drag and drop the characteristics from the left onto the correct infrastructure deployment types on the right.
Answer:
Explanation:
Explanation
NEW QUESTION 100
What is the calculation that is used to measure the radiated power of a signal after it has gone through the radio, antenna cable, and antenna?
- A. mW
- B. dBi
- C. EIRP
- D. dBm
Answer: C
NEW QUESTION 101
Refer to the exhibit.
An engineer must deny Telnet traffic from the loopback interface of router R3 to the loopback interface of router R2 during the weekend hours. All other traffic between the loopback interfaces of routers R3 and R2 must be allowed at all times. Which command accomplish this task?
A)
B)
C)
D)
- A. Option A
- B. Option B
- C. Option C
- D. Option D
Answer: C
Explanation:
Explanation
We cannot filter traffic that is originated from the local router (R3 in this case) so we can only configure the ACL on R1 or R2. "Weekend hours" means from Saturday morning through Sunday night so we have to configure: "periodic weekend 00:00 to 23:59".
Note: The time is specified in 24-hour time (hh:mm), where the hours range from 0 to 23 and the minutes range from 0 to 59.
NEW QUESTION 102
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
- A. security group tag ACL assigned to each port on a switch
- B. security group tag number assigned to each port on a network
- C. security group tag number assigned to each user on a switch
- D. security group tag ACL assigned to each router on a network
Answer: C
NEW QUESTION 103
What does Call Admission Control require the client to send in order to reserve the bandwidth?
- A. Wi-Fi multimedia
- B. traffic specification
- C. VoIP media session awareness
- D. SIP flow information
Answer: B
NEW QUESTION 104
In OSPF, which LSA type is responsible for pointing to the ASBR router?
- A. type 3
- B. type 2
- C. type 1
- D. type 4
Answer: D
Explanation:
Summary ASBR LSA (Type 4) - Generated by the ABR to describe an ASBR to routers in other areas so that routers in other areas know how to get to external routes through that ASBR. For example, suppose R8 is redistributing external route (EIGRP, RIP...) to R3. This makes R3 an Autonomous System Boundary Router (ASBR). When R2 (which is an ABR) receives this LSA Type
1 update, R2 will create LSA Type 4 and flood into Area 0 to inform them how to reach R3. When R5 receives this LSA it also floods into Area 2.
In the above example, the only ASBR belongs to area 1 so the two ABRs (R2 & R5) send LSA Type
4 to area 0 & area 2 (not vice versa). This is an indication of the existence of the ASBR in area 1.
Note:
+ Type 4 LSAs contain the router ID of the ASBR.
+ There are no LSA Type 4 injected into Area 1 because every router inside area 1 knows how to reach R3. R3 only uses LSA Type 1 to inform R2 about R8 and inform R2 that R3 is an ASBR.
NEW QUESTION 105
Refer to the exhibit.
Which outcome is achieved with this Python code?
- A. connects to a Cisco device using Telnet and exports the routing table information
- B. displays the output of the show command in a formatted way
- C. connects to a Cisco device using SSH and exports the routing table information
- D. displays the output of the show command in an unformatted way
Answer: B
NEW QUESTION 106
In an SD-WAN deployment, which action in the vSmart controller responsible for?
- A. onboard vEdge nodes into the SD-WAN fabric
- B. distribute policies that govern data forwarding performed within the SD-WAN fabric
- C. gather telemetry data from vEdge routers
- D. handle, maintain, and gather configuration and status for nodes within the SD-WAN fabric
Answer: B
Explanation:
Control plane (vSmart) builds and maintains the network topology and make decisions on the traffic flows. The vSmart controller disseminates control plane information between WAN Edge devices, implements control plane policies and distributes data plane policies to network devices for enforcement.
NEW QUESTION 107
Which statement about an RSPAN session configuration is true?
- A. Only incoming traffic can be monitored
- B. A fitter mutt be configured for RSPAN Regions
- C. A special VLAN type must be used as the RSPAN destination.
- D. Only one session can be configured at a time
Answer: C
Explanation:
in all participating switches -> This VLAN can be considered a special VLAN type -> Answer 'A special VLAN type must be used as the RSPAN destination' is correct.
Reference:
elease/12-2_55_se/configuration/guide/3750xscg/swspan.html
We can configure multiple RSPAN sessions on a switch at a time, then continue configuring multiple RSPAN sessions on the other switch without any problem -> Answer 'Only one session can be configured at a time' is not correct.
This is how to configure Remote SPAN (RSPAN) feature on two switches. Traffic on FastEthernet0/1 of Switch 1 will be sent to Fa0/10 of Switch2 via VLAN 40.
+ Configure on both switches
Switch1,2(config)#vlan 40
Switch1,2(config-vlan)#remote-span
+ Configure on Switch1
Switch1(config)# monitor session 1 source interface FastEthernet 0/1
Switch1(config)# monitor session 1 destination remote vlan 40
+ Configure on Switch2
Switch2(config)#monitor session 5 source remote vlan 40
Switch2(config)# monitor session 5 destination interface FastEthernet 0/10
NEW QUESTION 108
Refer to the exhibit.
Assuming the WLC's interfaces are not in the same subnet as the RADIUS server, which interface would the WLC use as the source for all RADIUS-related traffic?
- A. the controller management interface
- B. any interface configured on the WLC
- C. the controller virtual interface
- D. the interface specified on the WLAN configuration
Answer: D
NEW QUESTION 109
In a Cisco SD-Access fabric, which control plane protocol is used for mapping and resolving endpoints?
- A. DHCP
- B. VXLAN
- C. LISP
- D. SXP
Answer: C
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/solutions/CVD/Campus/cisco-sda-design-guide.html
NEW QUESTION 110
Drag and Drop the decryptions from the left onto the routing protocol they describe on the right.
Answer:
Explanation:
Explanation
NEW QUESTION 111
Drag and drop the characteristics from the left onto the QoS components they describe on the right.
Answer:
Explanation:
Explanation
Marking = applied on traffic to convey Information to a downstream device Classification = distinguish traffic types Trust = Permits traffic to pass through the device while retaining DSCP/COS values shapping = process used to buffer traffic that exceeds a predefined rate.
NEW QUESTION 112
Which deployment option of Cisco NGFW provides scalability?
- A. high availability
- B. tap
- C. clustering
- D. inline tap
Answer: C
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/security/firepower/fxos/clustering/asa-cluster-solution.html Clustering lets you group multiple Firepower Threat Defense (FTD) units together as a single logical device.
Clustering is only supported for the FTD device on the Firepower 9300 and the Firepower 4100 series. A cluster provides all the convenience of a single device (management, integration into a network) while achieving the increased throughput and redundancy of multiple devices.
NEW QUESTION 113
Refer to this output. What is the logging severity level?
R1#Feb 14 37:15:12:429: %LINEPROTO-5-UPDOWN: Line protocol on interface GigabitEthernet0/1, changed state to up
- A. Emergency
- B. Alert
- C. Critical
- D. Notification
Answer: D
NEW QUESTION 114
Which LISP infrastructure device provides connectivity between non-sites and LISP sites by receiving non-LISP traffic with a LISP site destination?
- A. map resolver
- B. PITR
- C. map server
- D. PETR
Answer: B
Explanation:
Proxy ingress tunnel router (PITR): answer 'PETR' PITR is an infrastructure LISP network entity
that receives packets from non-LISP sites and encapsulates the packets to LISP sites or natively
forwards them to non-LISP sites.
NEW QUESTION 115
......
Authentic Best resources for 350-401 Online Practice Exam: https://www.prep4surereview.com/350-401-latest-braindumps.html
Updates Up to 365 days On Developing 350-401 Braindumps: https://drive.google.com/open?id=147mdv4ekV1-uStpPXPeGgCmtOXmTBQBH
