Free Microsoft (AZ-700) Certification Sample Questions with Online Practice Test
AZ-700 Certification Study Guide Pass AZ-700 Fast
The Microsoft AZ-700 exam tests the candidates' expertise in implementing and managing Azure load balancers, traffic management, and network security groups. The AZ-700 certification also validates the candidates' proficiency in designing and implementing Azure network monitoring and troubleshooting solutions.
NEW QUESTION # 54
You have an Azure subscription that contains the resources shown in the following table.
Gateway1
provides access to App1 by using a URL of http://app1.contoso.com.
You create a new web app named App2.
You need to configure Gateway1 to enable minimize administrative effort.
What should you configure on Gateway1?
- A. a listener and a routing rule
- B. a listener and a backend pool
- C. a backend pool and a routing
- D. a listener, a backend pool, and a rule
Answer: A
NEW QUESTION # 55
You have an Azure Front Door instance that has a single frontend named Frontend1 and an Azure Web Application Firewall (WAF) policy named Policy1. Policy1 redirects requests that have a header containing "string1" to https://www.contoso.com/redirect1. Policy1 is associated to Frontend1.
You need to configure additional redirection settings. Requests to Frontend1 that have a header containing "string2" must be redirected to https://www.contoso.com/redirect2.
Which three actions should you perform? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.
- A. Create a policy.
- B. Add a custom rule to Policy1.
- C. Create an association.
- D. Configure a managed rule.
- E. Create a custom rule.
- F. Create a frontend host.
Answer: C,D,E
NEW QUESTION # 56
You have the hybrid network shown in the Network Diagram exhibit.
You have a peering connection between Vnet1 and Vnet2 as shown in the Peering-Vnet1-Vnet2 exhibit.
You have a peering connection between Vnet1 and Vnet3 as shown in the Peering -Vnet1-Vnet3 exhibit.
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION # 57
You configure a route table named RT1 that has the routes shown in the following table.
You have an Azure virtual network named Vnet1 that has the subnets shown in the following table.
You have the resources shown in the following table.
Vnet1 connects to an ExpressRoute circuit. The on-premises router advertises the following routes:
* 0.0.0.0/0
* 10.0.0.0/16
For each of the following statements, select Yes if the statement is true. Otherwise, select No. NOTE: Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION # 58
You have an Azure subscription that contains a virtual network named Vnetl. Vnetl has a /24 IPv4 address space.
You need to subdivide Vnet1. The solution must maximize the number of usable subnets.
What is the maximum number of IPv4 subnets you can create, and how many usable IP addresses will be available per subnet? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
NEW QUESTION # 59
You need to meet the network security requirements for the NSG flow logs.
Which type of resource do you need, and how many instances should you create? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION # 60
You have two Azure subscriptions named Subscription1 and Subscription2.
There are no connections between the virtual networks in two subscriptions.
You configure a private link service as shown in the privatelinkservice1 exhibit. (Click the privatelinkservice1 tab.)
You create a load balancer name in Subscription1 and configure the backend pool shown in the lb1 exhibit.
(Click tie 1b1 tab.)
You create a private endpoint in Subscription2 as shown in the privateendpoint4 exhibit. (Click the privateendpoint4)
For each of the following statements, select YES if the statement is true. Otherwise. select No.
Answer:
Explanation:
Explanation
Yes, Yes, No
NEW QUESTION # 61
You have two Azure virtual networks named Hub1 and Spoke1. Hub1 connects to an on-premises network by using a Site-to-Site VPN connection.
You are implementing peering between Hub1 and Spoke1.
You need to ensure that a virtual machine connected to Spoke1 can connect to the on-premises network through Hub1.
How should you complete the PowerShell script? To answer, drag the appropriate values to the correct targets. Each value may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Reference:
https://docs.microsoft.com/en-us/azure/architecture/reference-architectures/hybrid-networking/hub-spoke?tabs=cli#virtual-network-peering
NEW QUESTION # 62
You have the Azure environment shown in the exhibit.
You have virtual network peering between Vnet1 and Vnet2. You have virtual network peering between Vnet4 and Vnet5. The virtual network peering is configured as shown in the following table.
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION # 63
FirewallPolicy1 contains the following rules:
* Allow outbound traffic from Vnet1 and Vnet2 to the internet.
* Allow any traffic between Vnet1 and Vnet2.
No custom private endpoints, service endpoints, routing tables, or network security groups (NSGs) were created. For each of the following statements, select Yes if the statement is true. Otherwise, select No. NOTE: Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION # 64
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have an Azure application gateway that has Azure Web Application Firewall (WAF) enabled.
You configure the application gateway to direct traffic to the URL of the application gateway.
You attempt to access the URL and receive an HTTP 403 error. You view the diagnostics log and discover the following error.
You need to ensure that the URL is accessible through the application gateway.
Solution: You create a WAF policy exclusion for request headers that contain 137.135.10.24.
Does this meet the goal?
- A. No
- B. Yes
Answer: A
NEW QUESTION # 65
You have an Azure subscription that contains the public IPv4 addresses shown in the following table.
You plan to create a load balancer named LB1 that will have the following settings:
* Name: LB1
* Location: West US
* Type: Public
* SKU: Standard
Which public IPv4 addresses can be used by LB1?
- A. IP3 and IP5 only
- B. IP1, IP3, IP4, and 1P5 only
- C. IP1, IP2. IP3. IP4. and IP5
- D. IP3 only
- E. IP2only
- F. IP1 and IP3 only
Answer: A
Explanation:
Reference:
https://docs.microsoft.com/en-us/azure/virtual-network/virtual-network-public-ip-address This is because "Load balancer and the public IP address SKU must match when you use them with public IP addresses" https://docs.microsoft.com/en-us/azure/load-balancer/skus Standard SKU Load Balancer routes traffic within and across regions, and to Availability Zones for high resiliency.
NEW QUESTION # 66
Azure virtual networks in the East US Azure region as shown in the following table.
The virtual networks are peered to one another. Each virtual network contains four subnets.
You plan to deploy a virtual machine named VM1 that will inspect and route traffic between all the subnets on both the virtual networks.
What is the minimum number of IP addresses that you must assign to VM1?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION # 67
You have an Azure subscription that contains the virtual networks shown in the following table.
You plan to deploy an Azure firewall named AF1 to RG1 in the West US Azure region.
To which virtual networks can you deploy AF1?
- A. Vnet1, Vnet2. Vnet3, and Vnet4
- B. Vnet1, Vnet2, and Vnet4 only
- C. Vnet1 and Vnet2 only
- D. Vnet1 only
- E. Vnet1 and Vnet4 only
Answer: B
NEW QUESTION # 68
You need to implement a P2S VPN for the users in the branch office. The solution must meet the hybrid networking requirements.
What should you do? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION # 69
You have an Azure subscription that contains the resources shown in the following table.
The IP Addresses settings for Vnet1 are configured as shown in the exhibit.
You need to ensure that you can integrate WebApp1 and Vnet1.
Which three actions should you perform in sequence before you can integrate WebApp1 and Vnet1? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
Explanation
Text Description automatically generated with medium confidence
Reference:
https://docs.microsoft.com/en-us/azure/app-service/web-sites-integrate-with-vnet#gateway-required-vnet-integra
NEW QUESTION # 70
You have an Azure virtual network named Vnet1 that connects to an on-premises network.
You have an Azure Storage account named storageaccount1 that contains blob storage.
You need to configure a private endpoint for the blob storage. The solution must meet the following requirements:
Ensure that all on-premises users can access storageaccount1 through the private endpoint.
Prevent access to storageaccount1 from being interrupted.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
1 - Configure a private endpoint on storageaccount1 and disable public access to the account
2 - Deploy a virtual machine to a subnet in Vnet1
3 - Install the DNS server role and configure the forwarding of blob.core.windows.net to 168.63.129.16
4 - Configure on-premises DNS servers to forward biob.core.windows.net to the virtual machine
Reference:
https://docs.microsoft.com/en-us/azure/storage/common/storage-private-endpoints
NEW QUESTION # 71
You are implementing the virtual network requirements for VM Analyze.
What should you include in a custom route that is linked to Subnet2? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION # 72
You have an Azure subscription.
You have the on-premises sites shown the following table.
You plan to deploy Azure Virtual WAN.
You are evaluating Virtual WAN Basic and Virtual WAN Standard.
Which type of Virtual WAN can you use for each site? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Reference:
https://docs.microsoft.com/en-us/azure/virtual-wan/virtual-wan-about
NEW QUESTION # 73
......
Microsoft AZ-700 (Designing and Implementing Microsoft Azure Networking Solutions) Certification Exam is a professional-level certification that is designed to validate the skills and knowledge of IT professionals who specialize in designing and implementing complex networking solutions using Microsoft Azure. Designing and Implementing Microsoft Azure Networking Solutions certification exam tests a candidate's ability to design and implement secure and scalable network architectures on Azure, configure and maintain network infrastructure, and troubleshoot issues related to Azure networking.
Get Perfect Results with Premium AZ-700 Dumps Updated 152 Questions: https://www.prep4surereview.com/AZ-700-latest-braindumps.html
AZ-700 Dumps PDF 2023 Program Your Preparation EXAM SUCCESS: https://drive.google.com/open?id=1ZaMutLd6uCkpp4y-XhUHP80n0lLeeH1G
